worktable size:50x 70cm large manual heat press machine
large manual heat press machine Machine Parameter:
Voltage: 220V, 110V;
Temperature Scope: 0-399C degree;
Time Scope: 0-999sec;
Printing Size: 50X70CM
large manual heat press machine Product Features
1. The heating plate surface of Teflon paint, dust-proof, No need high temperature cloth;
2. Using intelligent digital display temperature controller, temperature control is accurate (+-10 C degree);
3. Pre-pressure adjustment unique way, the pressure be adjusted, convenient and flexible;
4 The digital display electronic timing, the process is completed automatically alert tone;
5. The cast aluminum heat plate, electric pipe and plate body cast as a whole, heat evenly, durable;
6. The surface is covered with high-temperature heat release layer, easy to clean, anti-oxidation;
7. Worktable laying temperature elastic silicone foam, can bear 400 C degree and does not distortion.
8 Matched 4 cm foam pad, better effect.
This machine can printing any color or black and white images, text transfer to: ceramics, metal, glass, clothing and other material, widely used in shop business, transfer personalized items, clothing heat transfer purposes.
a) Lift the handle so that the machine is open.Put the target products on the working platform, testing pressure if is appropriate, and not, need to adjust the pressure knob. (Turn the knob clockwise to increase the pressure, counter-clockwise to decrease pressure);
b) Open the machine, ready to hot stamping products. (Heating process, please do not be stamping is placed on the working platform, in order to avoid bad roast)
c) Turn the power switch on , temperature controller starting self-test, self-test for about 10 seconds to complete and enter the working state, then setting the working parameters (for the first time, set up the required:the temperature, time, see attached time and temperature instrument panel operating instructions)
After setting the temperature well, the time, the machine starts to heat up heating (the temperature rose to 200C degree takes about 15 minutes)
d) When the machine until desired temperature is reached, will require the transfer of goods tile placed on a table, hand pressed, the machine starts automatic timing, after reaching the set time, the machine issued a warning tone, lift the handle to complete the last operation.
Note: For security reasons, the power supply must meet a protective ground wire single-phase three-wire power supply.
1 If it is cool sublimation paper, printing completed. please waiting 15-20 seconds. Then tear it off. If it is heat sublimation paper, printing completed, please tear off the paper asap (Diagonal grain to tear down the clothes). Successful printed, need right time, temperature and pressure;
2 The final printed result depend on the products thickness,material and variety of sublimation paper.
3 different kinds of printing, please testing the sample. After get right time and temperature, then volume production.
1 Fault Phenomenon
Method: Judgement and treatment methods
2 Power Switch is turn on,but the light of machine is off;
Method: Power interface is not firm or the fuse of the power connector is burnout
3 Press knob is inflexible;
Method: Adding the lubricating oil on the rotary knob
4 Handlebar pressed down and get bumped ;
Method: Please adjust the pressure position screw to down
5 Handlebar is hard to lift;
Method: Please adjust the pressure position screw to up or counterclockwise to adjust the pressure adjustment knob
6 Heat plate can not heating;
Method: Instrument failure or chassis of the relay does not work or heat board burned
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Aomya Any 5 PCS UV LED Ink for Printing on Soft Materials , 5x1000ml M/Y/K/C/White
$ 300.00 / lot
Any 8 Bottles Digital UV LED Ink+ 1 Bottle Cleaning solution for Printing On Ceramic/Paper/Metal/Glass/Leather/Wood/PVC
3D Vacuum Sublimation Heat Press Mug Transfer Machine
$ 699.00 / piece
Aomya specialize ink Real UV ink Random choose color, UV LED Ink print on everything, 8x250ml
$ 80.00 / lot
Aomya specialize ink 10x500ml Real UV ink , UV LED Ink,can print on everything(phone shell ink)
$ 250.00 / lot
ANY 8 PCS OF UV INK/UV LED INK For UV Flatbed Printer 8x250ml
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.