0.4 mm 0.4mm Nozzle Extruder Print Dual Head Double Head for 3D Printer Dual-head FZ0628
Note: Normal temperature 190 -230 , the maximum temperature should be less than 280 .
Extrusion nozzle: 0.4,0.3,0.2 optional
Nozzle diameter: 0.4mm
Movement axis speed: 40mm /
Nozzle flow rate: about 24cc / h
Print Material: ABS
An extruder stepper motor model 42HB34F08AB
Print Material:PLA and ABS
The cooling fan operating voltage 12V
Motion shaft speed:40mm/s
Nozzle flow rate:about 24cc/h
K-type thermocouple (PT100 reference temperature of 0 degrees),500MM link line
Extrusion head voltage 12V,power 35W,500MM cable
Extruder stepper motor Model 42H46 – Operating voltage 12-24V
Size:13 x 9.5 x 8 (cm)
1 x Nozzle Double Head
There are some other information of 3D Printer Kit for your references: 3d printer / 3d printers / printer 3d / 3d printer kit / 3d printer machine / 3d printer parts reprap / extruder 3d printer / 3d printer extruder / reprap 3d printer / 3d printer controller ultimaker 3d printer / diy 3d printer / reprap 3d printer kit / replicator 3d printer 3d printer part / ramps 3d printer / ultimaker / makerbot / extruder 3d extruder 3d printer / nozzle head / nozzle extruder / nozzle 3d printer 3d printer heater / 3d printer filament / 3d printer abs / prusa 3d printer
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
3D printer Ultimaker heating block PEEK PTFE hot end extruder kit hot end
nuritsu digital minilab laser aom
50 roll/box dymo compatible standard address label (99012) good lquality etiquetas
3D printer Ultimaker 2 printhead Single-head kit hot extrusion head end kit 3D printer printhead hot selling Free shipping
3d Printer Accessories E3DV6-3mm Consumables Copper mouth/Nozzle/The print head for extruder /Aperture 0.2mm 0.3mm 0.4mm 0.5mm
$ 6.99 / piece
noritsu minilab aom driver
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.