Magnetic semi-auto cap heat press machine cap printing machine for sale ST 815
Voltage: 220V/ 110V
Temperature Scope: 0-399 C degree
Time Scope: 0-999 sec
Printing Size: 9.5x 15cm
Package Size: 54x 32x 86cm
cap heat press machine Feature:
1 Temperature controller adapt digital temperature control, high accuracy;
2 Electronic time control, process completion signal indication;
3 Floor installation of high temperature rubber sponge, stamping wide range;
4 Easy pressure adjustment;
5 Heat pipe and the heating plate note for one, heating time is short, safe and reliable;
6 Steam moving under pressure, more efficient, more effort;
cap heat press machine Apply:
The machine can printing any color color, portrait photos, landscape design and other stamping in the hat, especially for wide gifts, posters, etc. and also as personalized gifts and art appreciation and practicality in one.
1 Note: For safety reasons, the power supply must meet a protective ground wire single-phase three-wire power supply;
2 Lift the operation handle to keep the machine is open states. Put the products on work board, test the pressure if ok. If not,adjust the pressure knob. (Turn the knob clockwise to increase pressure, counterclockwise rotation to reduce pressure;)
3 Open the machine, take off the products.( Please do not put the products on worktable when heating in order to avoid bad roast;)
4 Turn on power switch, Temperature controller self-check, about 10 seconds after the self-test and enter the work state, set the operating parameters is available at this time, (the first time, set up the required: temperature, time after time and see attached instrument panel temperature Operating instructions)
5. set up the required temperature, time, the machine starts to heat up heating (the temperature rose to 200C degree takes about 15 minutes)
6. until the machine reaches the desired temperature, the need to transfer the hat tile placed on a table, and then stacked to transfer the image, pressing the operating handle, the machine automatically starts counting, to set the time machine alert tone, lift the operating handle, remove the cap speed, torn paper at the end, once the operation is completed.
1 If it is cool sublimation paper, printing completed. please waiting 15-20 seconds. Then tear it off. If it is heat sublimation paper, printing completed, please tear off the paper asap (Diagonal grain to tear down the clothes). Successful printed, need right time, temperature and pressure;
2 The final printed result depend on the products thickness,material and variety of sublimation paper.
3 different kinds of printing, please testing the sample. After get right time and temperature, then volume production.
1 Fault Phenomenon
Method: Judgement and treatment methods
2 Power Switch is turn on,but the light of machine is off;
Method: Power interface is not firm or the fuse of the power connector is burnout
3 Press knob is inflexible;
Method: Adding the lubricating oil on the rotary knob
4 Handlebar pressed down and get bumped ;
Method: Please adjust the pressure position screw to down
5 Handlebar is hard to lift;
Method: Please adjust the pressure position screw to up or counterclockwise to adjust the pressure adjustment knob
6 Heat plate can not heating;
Method: Instrument failure or chassis of the relay does not work or heat board burned
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Printer Power Supply Board For HP 126NW 126A 127FN 128NF 128FW 128 127 Power Board Panel On Sale
(CSOPC-H9730) OPC drum for HP clj-5500 clj-5500n clj-5500dn clj-5500dth clj-5500hdn clj-5550 printer toner cartridge free dhl
(TPOHM-C310) laser color copier toner powder for OKI C301 C321dn C310dn C330dn C510n C530dn C321 C310 1kg/bag/color free fedex
Use For Xerox 7232 Toner Chip,For Xerox 006R01271/72/73 006R01319 Reset Toner Chip For Xerox WorkCentre 7132 7232 7242 Copier
(TPXHM-C7525) color copier toner powder for Xerox wc7525 wc7535 wc7545 wc7556 006R011513 kcmy 1kg/bag/color Free fedex
CISS Suit for epson C90 CX5500,CX5501,CX5510,CX5505, for T0911 T0912 T0913 T0914 ink cartridge , continuous ink system
$ 23.00 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.