heat press machine, 8 in 1 combo heat press machine, cap heat press machine For Plate/Mug/Cap/TShirt /Phone case
Pls leave us a message under your order for below request:
1.The voltage you need: 220V or 110V
2.The plug standard: European standard/American standard/UK standard/or something else
Usually,if no special request or instruction,we will send 220v/European standard/red color to you as default selection,thank you for understanding!
8 in 1 heat press machine Parameter:
Voltage: 220V, 110V;
Temperature Scope: 0-399 C degree;
Time Scope: 0-999sec;
Cup size: 60Z, 110Z
Plate Diameter: 12cm, 15cm
Cap Diameter: 8x 15cm
Heat Plate size: 29cm x 38cm(6″x8″)
Package Size: 52x48x51cm
8 in 1 heat press machine Features:
1. Automatic temperature indicator stable electronic data with high accuracy.
2. A separate circuit control box easy to replace the instrument.
3. The heating wire and the heating plate integrated, safe and durable.
4. Automatic time control table
5. The high temperature silicone pad, the pressure more evenly, 180 rotation.
6. The pressure regulator convenience, photographs can be printed on the clothes tie the cup. Hat tiles. Plates, etc.
7. You can expand the heating element, small footprint, more funcations;
1 Turn on the power switch, Power switch lights. Then can setting the working parameter.( Frist use,please setting temperature, Time, more details please read the instrucation of the control panel time and temperature operation)
2 After setting the temperature,time,the machine starts to heat up heating (the temperature rose to 200 C degree and takes about 15 minutes)
3 Lifting the handle to make the machine open. Move the head to other sides, get the worktable, put the products on worktable, testing the persure if is good. If not, need to adjust the pressure knob. (Turn the knob clockwise to increase pressure, counterclockwise rotation to reduce pressure)
4 When the machine until desired temperature is reached, put the ;products on worktable, pressing the handle, press the timer, after reaching the set time, the machine issued a warning tone, lift the handle to complete the last operation;
1 If it is cool sublimation paper, printing completed. please waiting 15-20 seconds. Then tear it off. If it is heat sublimation paper, printing completed, please tear off the paper asap (Diagonal grain to tear down the clothes). Successful printed, need right time, temperature and pressure;
2 The final printed result depend on the products thickness,material and variety of sublimation paper.
3 different kinds of printing, please testing the sample. After get right time and temperature, then volume production.
4 The cup mat can not empty working, when heating, should be put cups, otherwise, will demage the heat mat or reduce the usage of the cup mat.
5 When using flat heat plate and cap mat, need preheat, when get setted temperature, then printing. Cup mat and plates map no need preheat when printing.
6 Temperature controller meter is complex, except to set the temperature and time, no need seting other extra program. Otherwise, easy to cuase the program confusion.
1 Fault Phenomenon
Method: Judgement and treatment methods
2 Power Switch is turn on,but the light of machine is off;
Method: Power interface is not firm or the fuse of the power connector is burnout
3 Press knob is inflexible;
Method: Adding the lubricating oil on the rotary knob
4 Handlebar pressed down and get bumped ;
Method: Please adjust the pressure position screw to down
5 Handlebar is hard to lift;
Method: Please adjust the pressure position screw to up or counterclockwise to adjust the pressure adjustment knob
6 Heat plate can not heating;
Method: Instrument failure or chassis of the relay does not work or heat board burned;
Have a please purchase trip!
0 out of 5 (0 Ratings)
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
MY-380F ink roll Coding machine,card printer,produce date printing machine,solid ink code printer(Painting type)
WSDM-68C Manual Code Printer,PVC card embossing machine,letterpress rotogravure printing machine.name card code printer
$ 242.00 / piece
combo mug printing machine mug heat printing machine for muilticolors 150*5
3D Mini Digital Sublimation Vacuum Heat Press Machine for Mugs, phone cases, plates Combo
$ 398.00 / piece
Mini 3D Vacuum Heat Press Machine Sublimation press for Phone cases
$ 329.00 / piece
3D DIY Sublimation Mold Tool For Printing Mug Transfer 3D Mini Heat Press Machine
$ 59.00 / piece
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.