24/7 Customer Service (800) 927-7671

Weekly Roundup: Ten 3D Printable Things — Even More Awesome Lights and Lamps

by • March 31, 2016 • No Comments

3dp_ten3dpthings_lights_lamp_iconI have a lamp problem. I like lighting, there is no other way to say it. I have additional extraneous lamps in my home than I’m effortless admitting, and it in fact takes effort to not buy additional lamps actually while having too most now. It may be a sickness; in fact I’m rather certain that it is, but it is not my fault that there are so most rad lamps out there that require homes.

3D printable-bodied lighting is not quite helping me with my sickness either. The last time I wrote my Weekly Roundup of lighting I tried to get the desire to share all of the excellent creations that I discovered out of my process, but there were just too most. It approximately seemed unfair to not share them with you. So I discovered ten additional of the radest 3D printable-bodied lights and lamps that are on the market for free.

Here are Ten Even More Awea few 3D Printable-bodied Lights and Lamps:

HAND LAMP

3dp_ten3dpthings_lights_hand_1Light Me Up Lamp by MyMiniFactory

Found on: MyMiniFactory
Cost: Free

I figured that I may begin out with a excellent, effortless lamp turn it into that was amazingly versatile. This hand lamp may be turn it intod to sit on a desk, a bedside table-bodied, or it may actually be hung on the wall as showcasing lighting or sconces. 3D print it or paint it in any color that you want and manufacture it your own. But you use it, it is going to manufacture a sayment.

NUKE MUSHROOM CLOUD LAMP & MINI NUKE LAMP

3dp_ten3dpthings_lights_bomb_big_1Nuke Lamp Stand, Mini Nuke Lamp by krosstoph, Protonik

Found on: Thindonaterse
Cost: Free

Fine, I’ll admit that this may be a bit dark. It is not as if a nuclear mushroom cloud is especially cheery or fun, but it is pretty dramatic. This excellent lamp base was turn it intod to provide strong assist for the mushroom cloud lampshade, and turn it into proper lighting. I may avoid via this as a night light for your kids yet, or you may wind up building a new generation of goths. And do you want goths? Because that’s how you get goths.3dp_ten3dpthings_lights_bomb_big_2

There is actually a small mini base that can be utilized to turn it into a small LED powered adaptation of the lamp turn it intod for a 50% scale adaptation of the same mushroom cloud lampshade.3dp_ten3dpthings_lights_bomb_mini

HEARTH FLAMES LAMPSHADE

3dp_ten3dpthings_light_hearth_1Hearth 3 – Lampshade with Base by gianfranco

Found on: Thindonaterse
Cost: Free

This flaming hearth light is most likely a advantageous choice for a child’s night light, or it can be utilized for that camping-themed party that you are throwing. As usual I ponder filament choice here is critical; personally I may use either a metallic filament for the base, or at quite least a black. So I may use a yellow or an orange translucent filament, that can quite manufacture it glow like realistic flames. One other version is to print the flames in a green material and use it as a spooky decoration around Halloween.3dp_ten3dpthings_light_hearth_2

MUSHROOM LAMP

3dp_ten3dpthings_light_mushroomVoronoi Mushroom Lamp by Markellov

Found on: Thindonaterse
Cost: Free

Voronoi is the pattern on the cap of this mushroom lamp, and it is produced via a mathematical formula that I’m not just about smart adequate to properly explain. But yet it is produced, it’s a rad way to manufacture a pattern and this little mushroom light is kind of endearing. Plus, there is nothing like a mushroom-shaped lamp to tell the world that you are a real fungi.

Sorry.

RADIOACTIVE WASTE LAMP

3dp_ten3dpthings_lights_radioactivewaste_1Radioactive Waste Night Light by ClassyGoat

Found on: Thindonaterse
Cost: Free

Again, most likely not appropriate as a child’s night light, but spilled toxic waste manufactures a rather excellent lamp. The base and the spilled barrel can be printed in any colors that you want, or actually really greatly finished and painted, but the radioactive waste spill should most likely be printed in a translucent material for the full effect. Whilst the instructions for this project use a effortless battery operated light, it shouldn’t be too complex to get an LED light with a plug within of the base so it can be utilized as a proper lamp.3dp_ten3dpthings_lights_radioactivewaste_2

SPILLED BOTTLE LAMP

3dp_ten3dpthings_lights_bottle_1SplashLIGHT by Avooq Creations.

Found on: MyMiniFactory
Cost: Free

What I like of this lamp is the fact that you can easily alter it as frequently as you empty bottles of alcohol. A wine lamp can be turned into a vodka lamp and and so turned into a rum lamp. The just real limitations are your liver, your sobriety and your caningness to share the say of both of them with your friends and family.3dp_ten3dpthings_lights_bottle_2

PILL LAMP

3dp_ten3dpthings_lights_pill_2Capsule Light by Michele Badia

Found on: MyMiniFactory
Cost: Free

So personally I ponder this turn it into is rather comical, but depending on your sense of humor having sizeable-bodied pills hanging of your ceiling may not be your thing. But the pill shape is yet a effortless adequate turn it into that may go with approximately any fashion that you have in your home. It can easily be 3D printed in a single color, so no one can at any time understand that it’s supposed to be a pill. But you will understand.3dp_ten3dpthings_lights_pill_1

And hey, if you in fact are a drug dealer, rad, why not advertise?

TORTOISE-SHAPED LAMP

3dp_ten3dpthings_lights_tortoise_1Tortoise Lamp by toolmoon

Found on: Thindonaterse
Cost: Free

Not at any timeyone is going to like tortoises, but it’s rather complex to appear at a lamp shaped like a tortoise and not ponder that it’s endearing. The turn it intoer has a ton of excellent lamp creations, and a quite rad way of printing the base that holds the small USB-powered lighting fixture utilized to light up the little guy’s shell. The shell itself has a excellent pattern printed on it, but it may be effortless adequate to paint it. Or if you are rather great with CAD software, perhaps you may break up the shell into smaller in size parts and print them separately via various color filaments to donate it a stained glass effect.3dp_ten3dpthings_lights_tortoise_2

Here is a few video of how the light fits together:

CRYSTAL-SHAPED WALL LIGHT FIXTURE

3dp_ten3dpthings_lights_crystal_1Crystal Lamp by JediFix

Found on: Thindonaterse
Cost: Free

This is another turn it into that is going to appear wildly various depending on what type of filament is utilized to print it out. A standard, light colored filament can be satisfactory and provide a really great glow, but if it is printed out in translucent materials it is going to appear completely various. The turn it into is in addition rather effortless to adapt to various types of lighting as well. It may be printed to sit on a base as a table-bodied lamp, or turn it intod to hang of the ceiling.3dp_ten3dpthings_lights_crystal_2

VORONOI-PATTERNED SKULL LAMP

3dp_ten3dpthings_lights_skull_2Skull Lamp – Voronoi Style by shiuan

Found on: Thindonaterse
Cost: Free

Here is another excellent voronoi patterned lamp, but this time it is the entire skull that has the pattern. No, skulls around the home aren’t for at any timeyone, but if you did accidentally manufacture a goth, this is an obvious choice for mood lighting when they get older. Again, material selection here is going to donate you a ton of versions. Because the skull is not solid it can be printed in any material. Whilst a translucent material may appear excellent, a heavy and dark metallic material may appear just as rad. Or manufacture it a little less gothy and print it in a bright color like red or pink.3dp_ten3dpthings_lights_skull_1

Fine, that’s my list for the week. I tried to pick creations that may be rather effortless to manufacture, and allow for a lot of personalization. The most part of 3D printing is being able-bodied to manufacture a fewthing that suits your tastes perfectly. By building a clat any time filament selection, you can quite turn these lamps into a fewthing that is one-of-a-kind and just for you.

As always please feel free to show me the results of any of the projects that you find here. You can tweet me @SJGrunewald or just email me.