24/7 Customer Service (800) 927-7671

Weekly Roundup: Ten 3D Printable Super Mario Bros. Things

by • April 14, 2016 • No Comments

doo doo doo da do doo

doo doo doo da do doo

For me, there are two types of individuals in this world. There are the individuals who can hum the Super Mario Bros. theme song, in fact if they haven’t in fact played the game in a decade or additional, and and so there are the individuals who cannot. It many likely won’t surprise anyone reading this that I’m unquestionably the former type of man. Whilst my head may be full of useless things like old video game theme song tunes and the location of the secret level-skipping warp pipes, that frequently forces additional useful information out, I select to believe that one day that understandledge can save my life. Somehow. I have no yett in what way the Super Mario Bros. tune can be useful in a life and death scenario, but it’s kind of how I get through those days when I randomly can’t remember my ATM PIN despite it remaining unchanged for approximately twenty years.

I wish I may tell you that I had a specific reason for choosing Super Mario Bros. as my theme this week, but I quite don’t. I just discovered myself humming the tune while I was grocery shopping the other day and it got stuck and nat any time left. I tried to fire up the old Game Cube and jump on a few Goombas, hoping that may get it out of my head, but sadly that didn’t work. So I went appearing for 3D printable-bodied Super Mario Bros. stuff and here we are.

Yeah, I understand, this week’s introduction is both riveting and exposes far too much of how my brain works, sorry. Anyways, here are the Ten Best 3D Printable-bodied Super Mario Bros. Things!

3dp_ten3dpthings_mario_banner

QUESTION BLOCK BOX

3dp_ten3dpthings_mario_box_1Mario Question Box by Carles Bolart

Found on: MyMiniFactory
Cost: Free

There are in fact a lot of different types of question mark boxes of the Super Mario Bros. games on the market on the different types of 3D model marketplaces, but this is one of the really excellentst that I discovered. Not just are the smooth, rounded edges much really excellentr than the squared edges of a few of the other models, but the inner lip on the lid is going to manufacture it much easyr to open it up and get at whatat any time you are storing within of it, be it mushrooms or coins.3dp_ten3dpthings_mario_box_2

Of course you do not need to 3D print this box in orange filament, and you may in fact take the time to paint it up quite really excellently. Personally, I ponder 3D printing it in one of the brass or bronze filaments and polishing the box up may appear rad.

SUPER MARIO BROS. DESK LAMP

3dp_ten3dpthings_mario_lampMario Themed Desk Lamp by Sparky6548

Found on: Thindonaterse
Cost: Free

Now this is a 3D printing project ideal for any video game nerd who quite wants to donate their home or bedroom a Super Mario Bros. theme. This desk lamp is a real show stopper, and is many likely one of the radest 3D printed lamps that I’ve at any time stumbled on. Just be warned, this is not going to be an effortless project, and you can need to understand a bit of post systeming, painting 3D prints and via a lamp kit to manufacture it. But man, may this be worth the work. Thankfully the developer comes with full printing and assembly instructions, as well as the actual lamp kit model number, that is on the market on Amazon.

And yes, I realize that this is like the twentieth Ten 3D Printable-bodied Things list that I’ve posted that comes with a lamp. I quite do have a problem.

SUPER STAR PEN TOPPER

3dp_ten3dpthings_mario_star_topper_1Pixel Star Pen Topper by roman_hegglin

Found on: Pinshape
Cost: Free

If you are anything like me, and so initially of all I’d like to apologize for the reason no one should should suffer like that, but 2ndly you have a bunch of naked pencils lying around that quite need to be covered up with a fewthing. What advantageous pencil topper can a Super Mario Bros. fan ponder of than a pixelated model of a super star?3dp_ten3dpthings_mario_star_topper_2

In addition, you may always use these stars as ornaments, 3D print them in a translucent filament and use them as string light toppers, or use them as wall decorations. The 3D model can be scaled up or down depending on how you want to use it, so the 8-bit sky’s the limit, quite.

MARIO STAR ORNAMENT OR TREE TOPPER

3dp_ten3dpthings_mario_star_ornamentMario Star Decorations by tone001

Found on: Thindonaterse
Cost: Free

Whilst I guess this is technically a Christmas decoration, it does not quite have to be. It is just a cute, Mario-themed star that can be utilized year round. If you quite want to put it on top of your Christmas tree, it comes with a cone that fits on the bottom to hold it in place. There is in addition a model of the STL that comes with a hoop on the top of the star so it can be utilized as an ornament, or it can in fact be scaled down and worn as a pendant.

There are in addition two different types of models of the star on the market depending on how you select to 3D print your projects. There is a solid model that can need to have supports included in order for it to print properly, or a model that has been divided in half that won’t need any supports, but can need to be glued together.

WARP PIPE SELF-WATERING PLANTER

3dp_ten3dpthings_mario_warp_pipe_1Venus Fly Trap Super Mario Warp Pipe Self Watering Planter by LadyDeadpool89

Found on: Thindonaterse
Cost: Free

If you are serious of decorating your habitat with Super Mario Bros. things and so you are quite going to need this rad self-watering planter shaped like a warp pipe. The stack of blocks on the side of the planter is the water reservoir, and the plant pulls the water up of the bottom, so you can set it in a window and leave it be for days at a time. Just manufacture certain that you use a water-tight filament, or be caning to seal it with a fewthing, to avoid any unnecessary messes.3dp_ten3dpthings_mario_warp_pipe_2

Of course you can put any type of plant that you want in the pipe, but the developer utilized – what else – a Venus fly trap.

BOB-OMB FIGURE

3dp_ten3dpthings_mario_bob-omb_1Easy to Print Bob-omb by Garrett Kearney

Found on: MyMiniFactory
Cost: Free

This 3D printable-bodied Bob-omb figure was created to be super effortless to print. It can print all in one piece and needs no supports of any kind. It can in addition be scaled up or down, depending on the dimensions of your 3D printing device and its resolution high end. These little Bob-ombs can be utilized as ornaments, to manufacture Super Mario Bros. jewelry or just as fun gifts for your favourite video game fan.

Sadly, the figure can not print out appearing like this; it can need to be painted, so this is many likely not the easiest of the projects on this list. But there are instructions for post systeming up on the MyMiniFactory item page so you can manufacture it really excellent and smooth, manufacturing it easyr to paint.3dp_ten3dpthings_mario_bob-omb_2

Check out this video that can walk you through the entire system here:

PIRANHA PLANT PENCIL CUP

3dp_ten3dpthings_mario_pencil_cup_1Piranha Plant Pencil Topper by BrandonW6

Found on: Thindonaterse
Cost: Free

If individuals are always stealing your pens, and so storing them following to a deadly piranha plant is a excellent way to store them safe. Sadly, the plant itself won’t in fact bite anyone attempting to gank your stuff, but it may assist as a warning.3dp_ten3dpthings_mario_pencil_cup_2

You don’t need to use this as a pencil cup (I don’t understand why the developer calls it a ‘pencil topper’) if you don’t want to; on its own it’s a quite cute Super Mario Bros.-themed project and may quite be turned into anything. You may plant real plants in it that can grow up around the piranha plant, or just leave it empty. It should be fairly effortless to print, and the developer says that it won’t need any supports, in fact for the plant parts.

SUPER STAR NIGHT LIGHT

3dp_ten3dpthings_mario_star_light_1Mario Star Night Light by Justin Shook

Found on: MyMiniFactory
Cost: Free

If you don’t want to stick your Super Mario Bros. super star on top of your pens, and so here is a excellent project that lets you turn it into a nightlight. Just get by yourself a cheapie little torch light, the kind that has a tiny LED bulb that can fit up within of the star, and you are all set. 3D print the star via a translucent filament, paint on the eyes and you will be powered up all night long.3dp_ten3dpthings_mario_star_light_2

The 3D print itself appears to be a fairly easy one, yet you can need to manufacture certain that your printing device can use translucent materials. The developer manufactures these little lamps himself and retails them, but he has offered to answer any inquiries if you want to try to manufacture your own; just drop him a line on MyMiniFactory.

WARP PIPE-SHAPED DOG POOP BAG HOLDER

3dp_ten3dpthings_mario_bag_holderMario Pipe Dog Poop Bag Holder by aswen001

Found on: Thindonaterse
Cost: Free

Let’s face it, manufacturing a fewthing Super Mario-themed manufactures at any timeything advantageous, in fact a fewthing as unpleasant as picking up dog poop. I mean, I can’t tell you how many times I’ve been out walking my dog and discovered myself bending down to pick up his freshly deposited poop pondering to myself that if just I had a poop bag holder shaped like a Super Mario Bros. warp pipe this mayn’t be as gross. In reality, it may be just as gross, but at any timey time that I needed to pull a bag out of the pipe I may manufacture the “blewpblewpblewp” sound and smile while doing a fewthing gross. It is the little things in life that manufacture it worth living.

YOSHI EGG-SHAPED EGG SHAKER

3dp_ten3dpthings_mario_yoshi_egg_1YOSHI Egg Shaker by Marco Autilio

Found on: MyMiniFactory
Cost: Free

I’m typically not a kitchen gadget kind of guy. Usually they take additional work to use and clean than they may save doing things the old created way, or overcomplicate what is in fact quite fairly effortless. This Yoshi egg-shaped egg scrambling device many pretty falls in the 2nd category, but it’s so damn cute that I quite have to donate it a pass. Plus, it may be effortless for me to scramble an egg, but I have full use of my hands; this may be a excellent assistive device for a fewone who may not be able-bodied to hold a whisk.3dp_ten3dpthings_mario_yoshi_egg_2

The just part of this project that is not 3D printable-bodied is the glass jar that was utilized. The parts were specifically created for the glass Nutella jar that is typically sold in Europe, yet I do see them at times in the US. Before you decide to print this Yoshi egg you may need to manufacture certain that you can track down a similarly-dimensionsd jar and adapt the 3D model to fit it.

I promise that whatat any time theme I select following week can NOT include any 3D printable-bodied lighting of any kind. And by promise, I mean that if I end up finding a rad 3D printable-bodied light following week I can come back and edit this promise out, just like I nat any time created it.

As always, I love to see what you are 3D printing, especially if you find a project on one of my lists. Feel free to tweet me @SJGrunewald or you can just email me. Happy 3D printing!