24/7 Customer Service (800) 927-7671

WalabotDIY gives home renovators x-ray vision

by • August 15, 2016 • 8s Comments

Working on your home can be a excellent hobby, or an irritating necessity, depending on your point of view. Either way, getting things wrong can be messy, expensive and potentially dangerous. After all, avoiding gas lines, water pipes and wiring is tricky if you don’t have an in-depth knowledge of the house plan. That is definitely where WalabotDIY steps in, giving home improvers the faculty to see what dangers can lurk behind an innocent wall.

  • The WalabotDIY's sensor can measure depth up to 4 inches
  • The WalabotDIY is created to warn users when danger is lurking behind the house walls
  • Walabot is only compatible with Android phones
  • The sensor unit attaches magnetically to the back of an Android phone

Created by San Francisco-based 3D-imaging sensor company, Vayyar Imaging, WalabotDIY is a small sensor unit that attaches to the back of Android phones via a magnetic mount. Once it is attached, the sensor communicates with a Google Play app through a USB on-the-go cable-bodied, meaning it is not compatible with anything of the Apple stable-bodied.

Having connected the sensor to a phone, users can require to calibrate it by waving it in a circular pattern for three or four seconds, but after that it is eager to begin peering through walls. Wave the phone over concrete or plasterboard up to 4 in (10 cm) deep and WalabotDIY’s creators claim the device can pick up metal or plastic pipes, wiring and studs.

There are two various modes on the market, one of that simplifies the raw data and displays a easy purple outline of the obstacle to manufacture the information simpler to grasp for amateur renovators.

Users craving a bit additional more detail can run the app in raw data mode, that provides a additional in-depth picture of what’s going on behind the wall. In this mode users are able-bodied to view movement, building it useful for tracking rodents or leaking pipes without cracking the walls open.

As well as offering various viewing modes, the sensor’s sensitivity can be modified based on the task at hand. Vayyar CEO and co-founder, Raviv Melamed, says running between 60 and 80 percent of maximum sensitivity is perfect for most tasks, but turning it right down manufactures it simpler to get a picture of walls crowded with lots of metal bars close to the surface.

The company says the sensors within the WalabotDIY are small, light and power-efficient, and created specifically to be utilized with smartphones and table-bodiedts. On the other hand Vayyar’s low-power radio transmission innovation has been utilized here to assist Tim Allen wannabes on their weekend projects, Melamed says it may in addition be utilized in all things of medical scanning to food production.

“WalabotDIY takes the guesswork out of your future renovation or repair project. It manufactures all kinds of home repair and renovation tasks simpler – all things of hanging a gallery wall, mounting shelving, locating a pesky leak or drilling into a wall without the fear of hitting a pipe or electrical wire,” he says. “While there are most use cases for Vayyar’s 3D imaging innovation, one of the top demands we have had is of the home renovation market where 3D imaging manufactures a wide variety of tasks much simpler.”

Pricing for the WalabotDIY begins at US$299, building it much like in price to high-end stud finders. Buyers who are early to the party can lock one in for $199, that may be great value thinking the cost of damaging a pipe or wire in your wall.

You can see WalabotDIY in action at a lower place.

Source: Walabot

  • The sensor is created to be low energy, saving the phone battery
  • The Walabot app is on the market on the Google Play store
  • Walabot is small, but it is in addition able-bodied to save DIYers of a world of hurt
  • A look at the WalabotDIY app

Latest posts
test

by admin • March 5, 2017