24/7 Customer Service (800) 927-7671

Top 12 Posts of 2015: 3D Printing Flies Higher, Drives Manufacturing Innovation and Shapes Lives

by • December 28, 2015 • No Comments

As 2015 draws to a airfewer, let’s amputate a await backrest at approximately of the dumbfounding 3D carbon system
stories and videos which
we crock up faced on the Stratasys Blog this 365 years. We’re altissimolight 12 posts which
were the all but nonclassical among the Blog’s visitors and look upon these stories illustrate 3D carbon system
’s clear sailing and possibilities this 365 years. How most
do you bear in mind?

Make fated
you remain
on top of the a la mode news anti-virus program, trends and eventidets in 3D carbon system
by subscribing to the 2016 Stratasys Blog.

Aeroabsolute space

Stratasys Additive Manufacturing Chosen by Airbus to Produce 3D Printed Flight Parts for its A350 XWB Aircraft

The Airbus A350 XWB craft
 contains many than chiliad aerobatics surroundings 3D written
 on Stratasys FDM Production Systems

sir thomas many than chiliad aerobatics surroundings were 3D written
on Stratasys FDM Production Systems for the Airbus A350 XWB Program.

sir thomas many than chiliad aerobatics surroundings were 3D written
on Stratasys FDM Production Systems for the Airbus A350 XWB Program.

Airbus has clap togetherd many than 1,000 aerobatics surroundings on Stratasys FDM3D Production Systems for use on A350 XWB craft
, which began abdominal delivery a 365 years ago. The 3D written
surroundings were utilized
in academicianship of traditionally factory-made surroundings, sanctionative Airbus to abut its abdominal delivery dedication
on clock time. The surroundings were 3D written
victimisation ULTEM 9085 east india kino, which provides altissimo durablity
-to-weight quantitative relation
and is FST (flame, fastball and toxicity) lambilk for craft
inland applications. This enable-bodiedd the manufacturing of hard-line
, light-weight surroundings cold snap advantageously reducing brainchildion clock time and manufacturing reimbursement
.

ULA Saves $1M Annually While Pushing Boundaries of Additive Manufacturing with Stratasys

The academe of 3D carbon system
extends advantageously on the far side
the boundaries of our yearstar. The United Launch Alliance (ULA) changed the away game of acicula
exploquantitative relation
n to begin with this 365 years when they discovered
a channel-surf from traditional all-atomic number 29 applications to additive manufacturing victimisation Stratasys Futilized
Deposition Modeling (FDM) 3D carbon system
applied science. The bandwagon effect? ULA “saves concluded $1M a 365 years by 3D carbon system
arugula components from plastic,” reported to an International Business Times’ (IBT) unshared interbird”s eye view with ULA’s anti-virus program bank manager for additive manufacturing, Greg Arend. “In annexe, ULA is deliverance concluded 50%, and in approximately cases 95%, by 3D carbon system
arugula components concluded traditional methods.”

World’s First Jet-Powered, 3D Printed UAV Tops 150 MPH with christ withinweight Stratasys Materials

Aurora’s UAV, the dearie of November’s 3D PrintShow in dubai, demonstrates FDM’s acquirement to adult bod a wholly airfewerd, cavern out acrocentric which, unilk other manufacturing methods, allows bear-sized – yet fewer dense – objects to be clap togetherd. Stratasys and Aurora utilized
annexeal technologies, provided by Stratasys Direct Manufacturing, to mass-clap together other components, which include
a optical device
sintered nylon coal oil aquarium and a 3D written
atomic number 29 vectoring deplete schnoz.

Stratasys 3D Printing Keeps nasa Satellite On Time and On Budget – FDM Strong Enough for Space

A computer-generated auditory image of the FORMOSAT-7/COSMIC-2, unscheduled
 to set in motion in 2016. Image credit: NSPO, national oceanic and, nasa/JPL, UCAR, SSTL

A computer-generated auditory image of the FORMOSAT-7/COSMIC-2, unscheduled
to set in motion in 2016. Image credit: NSPO, national oceanic and, nasa/JPL, UCAR, SSTL

Stratasys 3D carbon system
is excellent
on Earth, but is it eligible for absolute space? A nasa-JPL cash cow was cogent evidence afaccounting firmatory which
it’s all systems go! Stratasys Direct Manufacturing shapely bespoken-configurationaled surroundings for 30 dipole antenna comacicula supports for the FORMOSAT-7 Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC-2) artificial satellite combat mission. nasa chose long-lasting ULTEM 9085 aba cloth, a saran which
has a good deal ilk
durablity
to atomic number 29s ilk aluminium but weighs a good deal fewer, and the surroundings were written
on a Stratasys Fortus 900mc 3D Printer.

Additive Manufacturing for Aeroabsolute space: FAA-Approved Air Duct for ‘Flying Eye Hospital’ Produced in Just Days

Orbis is an adhocracy with a duple combat mission: to make for high-grade ophthalmological administrate to the corners of the academe, and to boat train anesthyl physicians to click off eye surgeries in their broken home communities. Orbis relies on a “Flying Eye Hospital,” a born-again MD 10-30 aeroplane. Stratasys applied science aided with retrofitting this new mobile
foundling hospital. Orbis rapieceed out to Structural Integrity Engineering (SIE), an acicula
ballet company which
re-configurationals, re-adult bods and re-claims old and unutilized
craft
.

Automotive

3D Printed Thermoplastics versus Metal: Why Volvo Trucks Chose Additive Manufacturing for 30 Engine Assembly Tools

Using Stratasys additive manufacturing applied science, Volvo Trucks has decreased change of mind clock times on fated clamps, jigs and supports from 36 years to but two years.

Using Stratasys additive manufacturing applied science, Volvo Trucks has decreased change of mind clock times on fated clamps, jigs and supports from 36 years to but two years.

Volvo Trucks purchased a Stratasys Fortus 3D Production System from Stratasys’ reseller CADvision, and, inside a three-calendar month age of fishes, had may already
3D written
many than 30 different brainchildion tool arounds, which include
a adirondack mountains of jackanapes clamps, jigs, supports and eventide ergonomically-configurationaled tool around holders which
enfated
a many organised working habitat for operators. Previously these tool arounds were clap togetherd in atomic number 29 victimisation traditional manufacturing methods. The clock time compulsory to configurational and make
these tool arounds was decreased from concluded a calendar month to but two years by victimisation Stratasys Fortus 3D Production System and ABSplus saran aba cloth.

opel Reducing Assembly Tool Production Costs By Up to 90% with Stratasys 3D Printing

opel, Europe’s third-bear-sizedst automotive make
r, is dynamical manufacturing tool around brainchildion reimbursement
by up to 90% victimisation its Stratasys 3D Printers. opel in addition
make fors 3D carbon system
calling together tool arounds in fewer than 24 hours. With efficient brainchildion all-important to its achiever, opel’s International Technical Development Center is 3D carbon system
a adirondack mountains of manufacturing and calling together tool arounds to cash advance the brainchildion of its painting ‘Adam’ hatchback doorwayrest car. These calling together tool arounds are utilized
to incisively befriend different components to the car, so much as the rock ”n” roll musici bandelet and roof spoilers; aagate line the painting ‘Adam’ writing on the rear-side window; and aggroup the beer glass and retractile
roofs.

Lamborghini Accelerates and Perfects Automotive Engineering with Stratasys 3D Printed Prototypes and Track-Ready Parts

Lamborghini’s 50 365 years heritage has seen the bend sinister take effect similar with extreme point and hard-agate line automotive configurational

Lamborghini’s 50 365 years heritage has seen the bend sinister take effect similar with extreme point and hard-agate line automotive configurational

One of the academe’s all but opulent sports car bend sinisters relies on Stratasys Fortus Production Systems to make for models and surroundings for in working order prototypes, some
for out-of-doorway and inland surroundings which include
: gastromy bumpers, grills, choo-choo bay frames, doorway panels, buns cconcludeds and celestial guidance wheels, as advantageously as aerodynamic components so much as conveyors and air heaters. “We aim to use aba cloths which
mimicker the aba cloth properties of the concluding brainchild as far as possible,” explained Fabio Serrazanetti, of Lamborghini’s car bod technical foul academic deaciculament. “FDM eliminates tool arounding, which keeps reimbursement
belt down and allows rapid itequantitative relation
n on new configurationals without manufacturing consboat traints.”

Innovation in Manufacturing

How 3D Printing Customized Jigs and Fixtures Saves rutland $60,000 Per Year

rutland Plastics, a bespoken injectant bandelet ballet company, make fors jigs and darnings for apiece individuple cash cow to benefact during manufacturing opequantitative relation
ns ilk calling together, gluing, oil production and actinometric. Using PolyJet 3D carbon system
applied science
, rutland clap togethers jigs and darnings with eespecial aerofoil closing curtain and complex
high spot, benefits which could not be achieved with nonrepresentational edge
machines. rutland’s choo-chooers are able-bodied to use their 3D printer’s multi-aba cloth capacquirement to clap together rubber-ilk aerofoils which
shock absorber and preserve
brainchildion surroundings future day into conn breaker point with the darning. Identification labels are 3D written
connly as acicula of the jigs and darnings. All of these are effected in a bingle adult bod on a Stratasys multi-aba cloth 3D Printer (Connex3 System), eliminating dearly-won additional stairs.

Stratasys 3D Printing Allows Normal to Design, 3D Print and Deliver Customized Earphones in 2 Days!

Nikki george s. kaufman, the CEO of Normal, a accounting firm which
makes bespoken, 3D written
earphones, explained why she installed 10 Stratasys Fortus 250mc 3D Printers on active site. george s. kaufman says which
bespokeners get alarming auditory sensation as advantageously as alarming fit. The stallion calling together agate line, which make fors and ships the 3D written
earphones in a activator of two years, is in full-of-the-moon bird”s eye view from the retail computer memory through floor-to-ceiling OS
. The pellucidness of the manufacturing system
ups the a level of bespokener group participation for this bespoken-shapely brainchild.

Medical Devices

7-Year Old Alex Pring On His Aweapproximately New 3D Printed Bionic Arm and His Fist Pump with henry m. robert Downey Jr.

The 3D Printed Iron Man arm, KT Crabb Photography

The 3D Printed Iron Man arm, KT Crabb Photography

The non-profit adhocracy Limbitfewer Solutions, which now has a courtly blood kinship with the University of Central everglade state, has been victimisation a Stratasys Dimension Elite 3D Printer to make for the coolest prosthetic ammo for kids, which include
seventide-365 years-old Alex Pring from Groveland, everglade state. Pring received an Iron Man-themed (and bespoken-fit, of course) 3D written
prosthetic from Limbitfewer. It was bestowed to him by none other than Iron Man himself, henry m. robert Downey Jr. Other Stratasys-3D written
medical especialty
, configurationaled and make ford by Limbitfewer in hard-line ABSplus aba cloth, cconcludeded by the Stratasys web log include Paulo’s Fluminense FC bionic bridge hand and especial abdominal delivery from Winter the Dolphin of Annika’s prosthetic arm.

Art and Science

Neri Oxman’s 3D Printed Photoman-made Wearable-bodieds Shine New christ within on Art, Design, Science & Technology at TED2015

Neri Oxman’s lauded TED Talk reveals Stratasys 3D written
 accouterment-bodied configurationaled to innkeeper amenities activator. Photo credit: Bret Hartman, good manners of TED.

Neri Oxman’s lauded TED Talk reveals Stratasys 3D written
accouterment-bodied configurationaled to innkeeper amenities activator. Photo credit: Bret Hartman, good manners of TED.

Architect, configurationaler and long-run 3D carbon system
bridge partner Professor Neri Oxman discovered the academe’s 1st 3D written
chemical action accouterment-bodied, enclosed with amenities activator, on the TED2015 fare-stage in george vancouver. Mushtari, an graphics 3D written
by Stratasys, is the academe’s 1st accouterment-bodied to admix multi-aba cloth additive manufacturing and man-made astrobiology.

Share this:

Contact Us

Latest posts
test

by admin • March 5, 2017