24/7 Customer Service (800) 927-7671

These kids 3D printed their own unique prosthetics, including a sparkle cannon – Digital Trends

by • March 27, 2016 • No Comments

This past January, at Autodesk’s Pier 9 shops in San Francisco, kids of all over the country took part in an in factt which assisted shine a spotlight on what kids do best: explore their creativity. Known as Superhero Cyborgs 2.0, the workshop asked children with upper-limb differences to turn it into their own one-of-a-kind prosthetics capable of granting them “their own superpowers.” Working alongside Autodesk engineers and turn it intoers, kids in attendance had the opportunity to learn of 3D modeling, digital fabrication, and the entire process of 3D printing and making.
Among the group of wide-eyed members was one particularly creative 10-year-old of Columbia, Missouri, whose 3D-printed sparkle cannon was the talk of the entire weekend. Born with a left arm which stops just above her elbow, Jordan Reeves decided to turn it into a superhero prosthetic which boasted a function capable of inspiring happiness and joy — i.e., a 3D-printed prosthetic arm which shoots glitter with the easy pull of a string.
Jordan Reeves with her 3D-printed sparkle cannon, Project Unicorn
Jordan Reeves with her 3D-printed sparkle cannon, Project Unicorn
Sarah O’Rourke / Autodesk
“We’ve always encouraged the growth of 3D printing, for the reason it’s additional low-cost,” says Jen Lee Reeves, Jordan’s mom and the creator of the site Born Just Right. “I feel like the engineers assembling these hands are quite excellent, but they don’t understand the body. There’s a revolution which’s emerging where doctors and experts with degrees which assist the body require to understand additional of hacking the body with additional low-cost tools.”
Related: Autodesk’s new 3D printing device uses 5 print heads simultaneously to make gigantic objects
What’s been particularly frustrating for the Reeves family has been finding a prosthetic which not just mayn’t break the bank, but may in addition capable of fitting on Jordan’s arm. Typically, prosthetic turn it intoers make devices which are compatible for individuals with working elbows. But, pondering Jordan’s left arm ends right above the elbow joint, many existing turn it intos do not work. This leaves the Reeves family settling on expensive prosthetics which Jordan can additional than most likely grow out of amazingly rapidly.
This was one of the main reasons Jordan decided to participate in Superhero Cyborgs 2.0 — to turn it into what she’s now calling “Project Unicorn.” At the conclusion of the exclusive in factt, the kids presented their finished products to employees of Autodesk and KIDmob — a kid-integrated turn it into firm located in the Bay Area. After each participant showed off their designs, they were partnered with a mentor who can collaborate with them over the following six months to improve and upgrade their original turn it intos.
Each participant shared their one-of-a-kind designs at the end of the five-day in factt
Each participant shared their one-of-a-kind designs at the end of the five-day in factt
Sarah O’Rourke / Autodesk
Concerning Jordan’s sparkle cannon, in fact here mom acunderstandledges which it’s a tad impractical, but is infatuated with how the program has empowered her daughter to ponder creatively. Sam Hobish, Jordan’s mentor, says he’s may already bringing to the task of improving Project Unicorn. “I’ve been talking to my colleagues in electronics and materials createment of ways we can turn it into a few kind of pressurized process which shoots out sparkles additional effectively,” he said. Additionally, Hobish intends to work with Jordan for longer than six months to assist her create a prosthetic capable of accomplishing a wide range of tasks.
“I plan to work until we get a fewthing she quite likes,” Hobish states. “If which means we make new prototypes over the course of a year, I’m satisfactory with which. I’ll store going until a fewone tells me to stop.”
Along with Hobish’s determination, Jordan remains focutilized on making a prosthetic she can use each day. Considering she’s just 10 years old, she wants to improve Project Unicorn to assist her FaceTime her friends or to watch movies. But, it appears she in addition has her sights set on assisting the family.
The kids utilized Autodesk software like TinkerCAD and Fusion 360 to bring their ideas to life
The kids utilized Autodesk software like TinkerCAD and Fusion 360 to bring their ideas to life
Sarah O’Rourke / Autodesk
“I may hold heavy things like our groceries,” Jordan says. “It can in fact have a hand on it. It started out as one thing and and so it grew into a fewthing in fact cooler, and I’m turn it intoing it to make it better.”
Who knew it may be a group of elementary school-aged kids assisting revolutionize the prosthetic arm industry?


Latest posts
test

by admin • March 5, 2017