24/7 Customer Service (800) 927-7671

Single layer Graphene Oxide goes on sale

by • July 28, 2016 • No Comments


Graphene 3D Lab Inc has put a new material turn it intod of single-layer Graphene Oxide on sale. Is this the Graphene breakthrough we’ve been waiting for? Not yet, but we are getting there.

ORG-GO is not the ultimate Graphene-based material that may alter the world, but it’s pretty a step in the right way. It should deal with one of the leading obstacles facing the commercial introduction of Graphene into the wider world. That is the dispersion of the compound in resins and solvents.

It is a soluble coating, not the fabric

This new material dissolves easily in organic solvents to turn it into a final solution with a high concentration. It can and so be utilized to turn it into Graphene-reinforced 3D printing inks, as well as to reinforce polymers and nanocomposites. The solution can undoubtedly be utilized to coat a vast amount of materials and may assist turn it into all things of stronger products to ‘smart clothing’.

Graphene 3D is well on the way to commercial production of Graphene materials that may alter the world we live in. It is, fundamentally, the strongest and lightest material in the world and it has amazing electrical and thermal properties that mean it can have an impact on approximately each area of our lives. It can revolutionize electronics, provide thin and flexible screens, it can be useful in water filtration and in addition has next uses in tissue engineering.

It is lighter than steel and it’s flexible. That alone makes Graphene a prize that the world is fighting for.

Graphene does it all

The European Union put up a $1 billion investment in 2013 and a few of the sharpest minds in the world of material science are solely focutilized on making it commercially viable.

But making a stable model on a commercial scale is yet a conundrum that has tormented scientists since Professors Andre Geim and Kostya Novoselov scooped a Nobel Prize for isolating it in 2004.

It has yet turn it intod its way on to the market and Graphene 3D offers additional than 100 products to additional than 11,000 customers. They include NASA, Apple, Samsung, Harvard University and Ford Motor Co. ORG-GO can join this line of products on the company’s e-commerce platform: Graphene Supermarket.

At $125 for 100mg, Graphene Oxide quite is not bargain-priced, but and so the cost of production is the main problem preventing widespread adoption of the compound.

Graphene filament of Black Magic 3D

The filaments are Black Magic

The company offers a variety of Graphene-infutilized FFF filaments through Black Magic 3D, that include a conductive Graphene filament that it recommends for printing sensors and circuitry. It in addition retails flexible Nylon, magnetic PLA, silver PLA that has the appearance of metal and a variety of other rigorous filaments that satisfy the industrial market.

Graphene 3D holds an informative patent for the preparation and separation of atomic layers of Graphene. This is, nextly, the next. It gives the company an energy efficient system to separate out nanoparticles that may be the basis of a large-scale production method at much lower prices than the market offers right now.

Nanomaterial construction is on the way

We yet require to find a way to turn the nanomaterials into usable, large-scale products, but a new advance by researchers at Virginia Tech may hold the key to 3D printing graphene materials that are stable and truly harness the power of this amazing compound. Before now, scaling up Graphene production compromised the integrity of the material, that seriously diminished its durablity and conductivity.

If their lab-based good results with scaling up the production of nanomaterials can cross over into the commercial world, and so we may soon see the likes of Graphene 3D breaking all kinds of scientific barriers and material science can take a quantum leap forward.

Calverton, New York based Graphene 3D is on the brink of a fewthing quite big. ORG-GO is a step in the right way, but it can pale into historical insignificance in the coming months if the company can in fact turn it into graphene sheets.

We’ll be watching closely.


Latest posts

by admin • March 5, 2017