24/7 Customer Service (800) 927-7671

New York private hospital offers high quality 3D printed preview models for cosmetic procedures – 3ders.org (blog)

by • February 10, 2016 • No Comments

Feb 11, 2016 | By Alec

Getting cosmetic surgery requires a massive leap of faith. Even if you are fixing a deformity, pretty than your dimensionsable nose, you require to quite trust your surgeon and hope for great results. What if the results are worse than what you started with? And this is not just a nightmare scenario, as up to a third of patients are unhappy with the results. Fortunately, a new 3D printing technology adopted by the Montefiore Medical Center, a New York-based private hospital, can greatly improve your confidence preceding going into surgery. They have adopted the special Mirror Me 3D printing device, which produces high high end cosmetic versions of your face – at very least, of what it can appear like when the surgeon is done.
If you are not of New England or the US, you many likely never heard of the Montefiore Medical Center. Attached to the University Hospital for Albert Einstein College of Medicine in New York, it’s one of the top ranked hospitals in the US and are known for new, next-gen solutions for medical problems. Mirror Me 3D can be a bit additional acquainted to 3D printing hobbyists, as this is a relatively young 3D printing service founded by New York plastic surgeon Carrie Stern. As we reported last summer, Mirror Me 3D specializes in assembling 3D printed versions of each part of the body for cosmetic surgery patients, giving them a advantageous belief of what’s coming.

That high high end 3D printing device has now been taken into operation at the Montefiore Medical Center, and Dr. Oren Tepper told reporters of CBS2 which it was may already manufacturing all the difference. “Particularly with the face, where there is so much anxiety and stress around changes,” Dr. Oren Tepper explained, adding which there are a lot of unrealistic expectations.
So how does it work? Implementing high end photographs, 3D versions are produced in CAD software and adjusted to show the expected results. This is subsequently 3D printed in the plastic-like gypsum material. “It helps both the patient and the doctor,” Dr. Tepper explained. This can enable patients to manufacture additional conscious decisions during the pre-op consultation. But, there’s a 2nd function too: the CAD version can be projected onto the patient’s body during surgery (using various colors) to optimize surgical precision. “So you can see a topographical map of what we want to achieve,” he said.

So far, patients have responded enthusiastically to the thought. “If I didn’t have this 3D print, I may not have underwent surgery,” patient Emily Gorge told reporters. “I may hold the print up to my face and have such a additional realistic thought of what I may appear like.” The 9-year-old Jonathan Bridgnanan, who lost an eye to cancer, in addition benefited of this 3D printing approach. ““I appeared in the mirror and I saw how I get my eye back,” Jonathan told reporters. The technique was that successfully utilized to restore injure to the boy’s face.
The just downside is which this version can cost patients extra. According to Stern, the 3D printed versions take an average of two weeks to system, fabricate and send back and can cost anywhere of $60-$300 depending on the dimensions and complexity. But, it does add the many realistic dimension to surgeries yet, and you always end up with a rad mantelpiece too.

Posted in 3D Printing Application

Maybe you in addition like: T-Bone Cape motion control board launches on IndiegogoNew extruder may lower costs of 3D printing cellular structures for drug testingNew Ninja Printer Plate for consumer 3D printingmUVe3D releases improved Marlin firmware for all 3D printing devicesZecotek plans HD 3D display for 3D printing devicesAdd a smart LCD controller to your Robo3D printing deviceMaker Kase: a handy cabinet for 3D printing devicesHeated bed for ABS printing with the Printrbot Simple XLNext gen all metal 3D printing device extruder of MicronPico all-metal hotend 100% funded in 48 hours, B3 announces Stretch GoalCreate it REAL announces initially 3D printing Real Time ProcessorA dimensionsabler and additional powerful 3D printing device extruder on Kickstarter

Latest posts

by admin • March 5, 2017