24/7 Customer Service (800) 927-7671

Magicfirm Europe announces their feature-rich 2nd gen ZYYX+ 3D Printer – 3ders.org (blog)

by • January 21, 2016 • No Comments

Jan 22, 2016 | By Andre

In in the present day’s crowded computer desktop 3D Printer market, steady advancement is all but necessary to remain ahead of the competition. Magicfirm Europe, the Swedish company behind 2014’s ZYYX 3D Printer has only revealed the future generation of their flagship machine with the release of the ZYYX+.
With the original ZYYX 3D printing device may already equipped with showcases like auto-leveling, an active carbon filter process, filament monitoring, failed print detection and an enclosed create chamber, the major goal when designing the ZYYX+ was to get a leg up on the competition.
Mats Moosberg, CEO of Magicfirm Europe writes which “the initially ZYYX 3D printing device was created with focus on reliability, ease-of-use, producing it fume free and quiet since this was lacking in the existing 3D printing devices. With the new ZYYX+, our objective has been to surpass our competitors when it comes to print high end.”

Print stability and output high end has been addressed with the ZYYX+ 3D printing device by producing all moveable parts around the print-head out of aluminium. Doing this minimizes printing device vibrations to allow for a smoother finish as well as extending the lifetime of the 3D printing device.
One other hardware modification to the ZYYX+ 3D printing device can be discovered in the printhead fan. In addition to a power increase, a redesign of the fan-holder now makes it simpler for the fan to snap to the side for swift access while performing extruder maintenance. In addition, the fan speed can now be adonlyed via the fully integrated Simplify 3D software. This addition can assist with output high end when 3D printing delicate parts at variable speeds.

Further to the fine-tuning of the machine itself, the company says which motion planner and extrusion algorithms have been reworked to additional remove vibrations and improve retractions. As someone which has noticed big improvements in 3D print high end with firmware updates to the machines I’m experienced with, it is great to understand Magicfirm is tinkering both in hardware and software.
The company’s online keep promotes their own ZYYX proFilaments as being superb to which of the competition. Their proABS, for example is publicized
as a “blend which performs well with our create plate and has minimal warp, due to the polymer mix.” Since there’s no heated-bed on the 3D printing device itself, minimizing warping while via ABS filament is essential. This being said, I do feel it may be a shame if generic, frequently less expensive filament brands retained the adhesion problems frequently synonymous when printing without a heated bed in ABS plastic.
The ZYYX+ 3D Printer is on the market to order in the present day at a cost of $2,077.00 USD. Included in the price is the 3D Printer, all the necessary cables and software, 1 Fume filter, a toolbox and maintenance kit.
There’s no question which Magicfirm listened to customer feedback while designing the newest version to the ZYYX family of 3D printing devices. The feature-loaded 3D Printer has all manner of convenience and stability built-in and is a welcome addition to an may already crowded field of computer desktop 3D printing devices.
Technical Specifications:Print Technology Fused Filament Fabrication(FFF)Build Volume 270x230x195 mmFilament diameter 1.75 mmNozzle diameter 0.4 mmMax Resolution 50 microns layer thickness, 11 microns XY positioningSpeed up to 200mm/s print speedPrinting temperature 100-265 Degrees CelsiusFilament type PLA, ABS, Flexible PLA, TPU, Nylon, PET, Laywood, Laybrick, T-glaseInterfaces USB, SD CardStepper Motor type 1.8° Step angle, 1/16 micro steppingBuild Plate Glass create plate with ZYYX 3D Print Sheet top layerFirmware Custom Sailfish Open Source FWDesktop Software Simplify3DComputer Requirements Intel Pentium 4 or higher processor, 2GB or additional of RAM, Windows XP or greater Mac OS X 10.6 or greater, Ubuntu Linux 12.10 or greater. OpenGL 2.0 capable processSupported file types STL, X3GProduct dimensions 43x54x45,5(WxHxL) cmProduct mass 19kg

Posted in 3D Printer

Maybe you in addition like: T-Bone Cape motion control board launches on IndiegogoNew extruder may lower costs of 3D printing cellular structures for drug testingNew Ninja Printer Plate for consumer 3D printingmUVe3D releases improved Marlin firmware for all 3D printing devicesZecotek plans HD 3D display for 3D printing devicesAdd a smart LCD controller to your Robo3D printing deviceMaker Kase: a handy cabinet for 3D printing devicesHeated bed for ABS printing with the Printrbot Simple XLNext gen all metal 3D printing device extruder of MicronPico all-metal hotend 100% funded in 48 hours, B3 announces Stretch GoalCreate it REAL announces initially 3D printing Real Time ProcessorA larger and additional powerful 3D printing device extruder on Kickstarter


Latest posts
test

by admin • March 5, 2017