24/7 Customer Service (800) 927-7671

LulzBot TAZ 3D Printers Prototype Verterra Energy’s Intelligent Hydropower Turbine

by • March 15, 2016 • No Comments

lulz3Minneapolis, Minnesota is home to an new company that is getting a few attention on a matter that should be near and dear to the hearts of anyone concerned with climate alter. This company, Verterra Energy, Inc., founded in 2010, is in the business of alternative energy; additional specifically, it wants to manufacture hydropower accessible via easily installable-bodied turbines that may in addition eliminate the require to create hydropower dams. Sound ambitious? Consider the company’s commitment to “intelligent power,” and its undertaking “to provide distributed, renewable-bodied energy where its many requireed- in remote and createing regions. We believe the most way to assist others is to donate them the power to determine their own destiny.” Given the breadth and scope of Verterra Energy’s vision for intelligent power, it is fitting that the company has chosen to use open source LulzBot TAZ 3D printing devices to manufacture its hydropower water turbine generation III prototype.

Verterra calls its 3D printed turbine prototype the Volturnus. It is a four-foot-long object meant to power a number of various technologies in remote areas — the company’s first target recipients of its one-of-a-kind brand of intelligent power. Ted Christopher, CEO of Verterra Energy, Inc., explains the rollout strategy for the Volturnus turbine:

“Initially [Volturnus is] going to have the dimensionsablest impact in the areas that are only starting to create or don’t have any electricity or any infrastructure right now. We’re going to be able-bodied to go into these places and literally in the matter of a day they’re going to have purified water for the first time; they’re going to have electricity for cellphone towers and the Internet and computers and refrigerators and LED lighting.”

lulz1Why did CEO Christopher and the rest of the Verterra Energy’s team decide to use LulzBot TAZ 3D printing devices? The general lure of 3D printing’s convenience firstly led Verterra Energy to try it out, and Christopher reports that it may have been complex to skip 3D printing in favor of a various producing option:

“[The LulzBot TAZ has] been tremendously beneficial because…once we’ve got the print started and running, we are off doing other things. We’re going to meetings, we are networking, we are createing the business instead of in fact hand fabricating…There is no way we may have achieved the level of more detail and accuracy by hand fabricating the Volturnus prototype. It is so much simpler and faster, and really a bit rader I ponder [with a 3D printing device].”

lulz4Verterra Energy in addition reports choosing the LulzBot Taz for its dimensionsable create volume that may accommodate the generation III turbine prototype’s own dimensionsable dimensions and multiple parts composition. One other attraction to the printing devices was the price, since Verterra Energy sought to get the dimensionsablest 3D printing device and the LulzBot TAZ was inside the company’s budget.

Technical assist and high end are the last two reasons donaten for Verterra Energy’s choice of 3D printing devices. Now that the company has had the 3D printing experience, there’s no going back, as it aims to become fully commercially operable-bodied inside three years.

“It is an awe-inspiring new field here with 3D printing devices, and only the power that it donates startups to manufacture these parts and to manufacture prototypes is extraordinary,” says Christopher. “What’s so rad of 3D printing devices is we are getting back into that American spirit of in fact producing things and innovating again…If you can dream it and create it, you can…manufacture the real thing.”

It seems all systems are going in the right way for Verterra Energy, that has unquestionably caught the 3D printing spirit as it seeks to create its hydropower turbine form of intelligent power. Alternative energy, green innovation, and 3D printing once again prove to be strongly compatible, and it seems we can be seeing additional of Verterra Energy in the (intelligently createed, 3D printed, and alternatively fueled) next. Have you utilized the LulzBot Taz? Discuss in the Verterra Energy Uses LulzBot Taz 3D Printer forum over at 3DPB.com.

[Images: Verterra Energy, via LulzBot]