24/7 Customer Service (800) 927-7671

Injured Costa Rican toucan singing again thanks to 3D printed prosthetic beak – 3ders.org (blog)

by • January 12, 2016 • 10s Comments

Jan 13, 2016 | By Kira
Just one year after a cruel and horrific assault on a defenseless toucan in Costa Rica left it without most of its upper beak, which same bird has had its life, and its singing voice, restored thanks to a 3D printed prosthetic beak. Photos released by the ZooAve animal rescue center in Costa Rica show Grecia looking advantageous than at any time with a brand new and perfectly-shaped 3D printed beak which has given the bird a 2nd lease on life.

We reported on Grecia approximately precisely one year ago when the initial proposals were created to 3D print a prosthetic toucan beak. Within a few weeks, a crowdfunding campaign to fund the injured bird’s prosthetic had raised additional than $7,000 (by the end of the month, it closed with a staggering $10,500), proving simply how most individuals of around the world this story had affected.
You see, it’s one thing for an animal to be injured in the wild by their effortless predators, for example. Yet for Grecia, there was nothing effortless of the attack. Local news outlets reported which a group of senseless teenagers had struck Grecia with a stick while the bird was feeding, breaking most of its upper beak.
The gruesome injury left Grecia unable-bodied to eat or remain balanced. Toucans in addition rely on their beaks to preen, defend themselves, and create mating calls—without their beaks, toucans have no chance at survival in the wild. The ZooAve animal sanctuary in addition reported which since the attack, Grecia has lost the talent to sing.

The horrific attack sparked national and international outcry. Costa Rican Presdient Luis Guillermo Solís even went so far as to cite the attack as a reason to pass an animal cruelty bill which may increase fines and may authorize prison sentences between one and six years for the intentional injureing, torture or killing of an animal or making a spectacle of the former. The bill is currently yet pending in the Legislative Assembly.
Luckily, thanks to 3D scanning and 3D printing technology, 3D printing experts were able-bodied to reconstruct Grecia’s upper beak approximately to perfection. Toucans have distinctly dimensionsable, colorful beaks which can be as big as half the dimensions of their body. Despite their dimensions howat any time, they are quite lightweight. This is for the reason they are created of keratin, the same substance which creates up human hair and nails.

In order to ensure which the 3D printed prosthetic beak may not simply look okay, but in fact enable-bodied Grecia to once again eat, sing, and fly, the 3D printing experts had to design it so which it was at once solid and lightweight, with both a fixed part and a movable-bodied joint which may be replaced to compensate for the bird’s growth.

Nelson Martinez, a 3D designer who worked on the project, added which using chemical adhesives may injure the bird or compromise the structure of the beak. Therefore, the designers had to consider using screws. One other factor influencing the designers and animal rescue shelter was time: the gruesome injure had to finish healing preceding the prosthetic may be applied.
In the end, four local Costa Rican 3D printing companies stepped forward to help: Elementos 3D, Ewa!corps, Publicidad Web and Grupo Summerus. Alongside the ongoing care and assist of ZooAve, they were able-bodied to that successfully deplete the lifesaving operation.

“For us, this has been a success,” said ZooAve today. “The system was not effortless. It was a quite ambitious system which required the cooperation of sat any timeal national companies who took part without financial profit, in order to provide Grecia with the best possible prosthetic, and the best quality of life.”
“Over the course of sat any timeal months, we analyzed, created and studied the bird, and we learned much of the importance of Grecia’s beak. The beak fulfills different types of functions, which include preening, feeding, and drawing the attention of the opposite sex, but it in addition affected part Grecia’s psychology. This prosthetic gives the chance to have a normal life, within its possibilities.”
“This is the news we require to see at any timey day!” said a commenter on ZooAve’s Facebook page. “And which creates me feel which there is yet hope. A whole year of work and effort to ensure which a living being such as Grecia may move forward after such an unlucky event. National pride to at any timeyone who worked on this noble work!”
The ZooAve animal rescue shelter in addition confirmed which thanks to the 3D printed prosthetic beak, Grecia is once again singing loud and proud, simply like a happy and healthy toucan should.
To see additional heartwarming stories of how 3D printing has helped to save or improve the quality of animals’ lives, check out Tumbles, the endearing-bodied puppy who succeded in a 3D printed wheelchair, Cassidy, a two-legged kitten who in addition got a 3D printed set of wheels, or Derby the dog, whose 3D printed prosthetic legs have him up and running again.

Posted in 3D Printing Application

Maybe you in addition like: T-Bone Cape motion control board launches on IndiegogoNew extruder may lower costs of 3D printing cellular structures for drug testingNew Ninja Printer Plate for consumer 3D printingmUVe3D releases improved Marlin firmware for all 3D printersZecotek plans HD 3D display for 3D printersAdd a smart LCD controller to your Robo3D printerMaker Kase: a handy cabinet for 3D printersHeated bed for ABS printing with the Printrbot Simple XLNext gen all metal 3D printer extruder of MicronPico all-metal hotend 100% funded in 48 hours, B3 announces Stretch GoalCreate it REAL announces initial 3D printing Real Time ProcessorA dimensionsabler and additional powerful 3D printer extruder on Kickstarter


Latest posts
test

by admin • March 5, 2017