24/7 Customer Service (800) 927-7671

How to Use the New Gray Smooth Detail Resin Material from i.materialise

by • April 20, 2016 • No Comments

imaterialiseWith ten of the many high end and common 3D printing technologies, twenty various 3D printing material versions and over a hundred possible colors and surface finish combinations, Belgian 3D printing company i.materialise has a few of the many diverse 3D printing versions on the market. From nylon materials like Polyamide, to high additional detail resins, to metals like titanium, bronze and gold, chances are, if it can be utilized to 3D print, and so they have got it. The trick is, obviously, finding the correct material and manufacturing certain that the create is printable via it. Thankfully i.materialise comes with lots of printing and create guides to manufacture the decision of selecting the correct material simpler.

3dp_i_materialise_pig_tinyThis week i.materialise has introduced their newest material and posted a ton of information of how and when to use it. Smooth Detail Resin is the latest addition to their family of 3D printing materials and it is one of their top additional detail versions on the market. They have released the material as a trial version to see how their community responds to it, and to see how well it performs for a wide variety of various types of versions and uses. The final prints have remarkably smooth surfaces and the material is capable of making quite satisfactory additional details thanks to its 50 μm layers.

The material appears tailor-made for miniature figures, scale versions or any object that requires a high level of additional detail — an array of applications for that users have been clamoring and companies such as i.materialise and Shapeways have been responding. Additionally, Smooth Detail Resin material’s surface texture and its gray color manufactures it incredibly effortless to paint or finish. Smooth Detail Resin is a light-cured liquid resin material that is utilized for Digital Light Processing (DLP) 3D printing, that is sort of like a close cousin to Stereolithography (SLA), it just uses a various type of laser.3dp_i_materialise_dwarf

As with SLA versions, DLP prints are created thin layer by thin layer on an upside down create platform that is suspended over a vat of the liquid resin. This system can create remarkably smooth and striation-free versions, and can require quite little post systeming work. i.materialise offers 3D prints as either finished or unfinished, with the former tasking their technicians with removing all of the assist material and slightly post systeming the version, and the latter just leaving the assists intact for creators to finish themselves. Naturally the finished print can cost additional than ordering an unfinished print.

Smooth Detail Resin material has a surprising amount of showcases that manufacture it quite stand out of other resin material and 3D printing versions. The maximum printing dimensions is huge, so users can take full advantage of the roomy 260 x 160 x 193 mm (10.2 inches x 6.2 inches x 7.5 inches) createing envelope. The material is in addition quite forgiving of wall thickness, so showcases on the version can be as thin as 0.4 mm, that is 60% less than many other plastic materials. Smooth Detail Resin can in addition create additional details as tiny as 0.3 mm with an accuracy of less than 1%. The final part resolution is capable of so much additional detail that i.materialise in fact warns users to manufacture certain that no triangles of the original 3D create can be visible, for the reason they can show up on the print if users aren’t careful.3dp_i_materialise_frog

The material can work quite well for any hollow versions, and users do not have to include any drainage holes in their 3D version file. The minimum wall thickness for hollow versions is a super-slim 1mm. Unfortunately Smooth Detail Resin is incapable of making interlocked or enclosed parts without a lot of assist material that may require to be removed. i.materialise recommends that any versions that are createed to be assembled include at very least a 0.6 mm clearance between the two connecting parts. This allows for the individual parts to easily fit together despite any surface finish textures that may prevent it, as well as leaving room for glue or bonding materials that won’t run or drip out of the cracks.

The new i.materialise Smooth Detail Resin is already just a trial material, meaning that if it does not perform as expected, or the community responds poorly to it, it may be removed and the formula altered or changed. You can see all of the i.materialise 3D printing material and finish versions here, and you can learn additional of Smooth Detail Resin create guidelines and specifications page here. Discuss additional in the Smooth Detail 3D Printing Resin forum over at 3DPB.com.3dp_i_materialise_lady_baloon