by • February 14, 2016 • No Comments
Written by Nandagopal Rajan | Published:February 15, 2016 3:18 pm HP hopes to bring the weight level customisation that helped its alter printing in new times to 3D printing as well. (Source: HP 3D printing video of YouTube)
HP is at present undergoing the biggest alteration in its history at the end of that it hopes it can have turned advancement, and the rest of the world, on its head. The world’s biggest beginup, as the tech giant likes to call itself, is begining out on a new path of discoquite and advancement.
“What we are driving for the next 75 years of HP is towards a vision we called blended reality, melding the physical with the digital, and doing it is a virtuous cycle,” explains Shane Wall, the Chief Technology Officer of HP who in addition runs HP Labs. In fact, HP Labs is developing the advancements that can go after the five big investments the company is banking on for the next — 3D printing, immersive computing, hyper mobility, IoT and smart machines.
The biggest impact may come of 3D printing, that has been on the sidelines of both consumer and commercial advancement for a few years now. HP hopes to bring the weight level customisation that helped its alter printing in new times to 3D printing as well.
“What we have is advancement that is perfectly
disruptive for 3D. We revealed it last year and it is called Multi-Jet Fusion. It is created on all of our print technologies and the 4,000 patents we have on our Inkjet Pagewide Array advancement,” explains Wall.
He says 3D printing currently has four barriers and this advancement can try and overcome those. “3D printing is slow, it is expensive, it creates parts that are poor high end and it is a closed ecosystems. We are going to alter that and address all four of these,” says Wall who was in India newly on a pretty long tour of the country inspecting HP’s R&D as well as producing facilities.
Read MoreHP Envy 13 #ExpressReview: The many elegant Windows 10 notebookHP offers device-as-a-service programme for Indian businessesHP Falcon can replace Lumia 950 as flagship Windows 10 handsetHP Pavilion x360 #ExpressReview: Spectre like hinge but at a cheaper priceHP Envy 17 #Express Review: Desktop replacement notebook done right, priced higher
“One, it can be at quite least 10 times faster, in a few cases up to 100 times faster. Second, and it can be at 20 per cent of the cost. Third, it can be at much higher product high end at the voxel level ( a bit like pixels). Finally, we can do in on a open platform so that folks can add their own software or materials,” he says. What this can mean, according to Hp, is that their edition of 3D printing can create the many strongest, lowest cost and new products.
Since this is at the basic voxel level, the colors go all through and there is the possibility of changing all characteristics of texture to consistency and smoothness of the products on demand, says Wall, revealing a miniature 3D printed guitar with actual strings.
“We believe this advancement can radically alter producing. We can move of the world of traditional producing where you stage in raw materials, automatize
and store products for retail, into a world where we create automatically or customise an existing create and print it out on demand,” says Wall. “That is quite relevant for India, especially with weight urbanisation. 3D producing addresses things like the require to haul in big material producing it quite relevant for the emerging markets.”
HP’s initially 3D printing products based on Multi Jet Fusion can begin shipping in the Fall of 2016. “It can focus on thermal-plastics. It can begin with black and we can add colours. So all this is quite real,” he says, adding how this is a 30-year vision that can radically alter producing.
HP is in addition looking at how this radical considering can have an impact in IoT too. “We can do all the traditional IoT things, but what we ponder is additional amazing is the Internet of All Things. What I can do now is print into these objects physical markings that are not visible to the naked eye, but can track this part and secure the donate chain,” Wall adds. “This is where it can get quite informative. We are in fact mapping physical objects to digital services with our embedded advancement.”
Wall expects there to be a alteration time. He ponders the initially products can go for prototyping, followed by low volume, high value producing space like car and aerospace. “Overtime we are going to see an interweaving of traditional producing with new additive techniques,” he says, explaining how for instance you can no longer require to store an inventory of spare parts decades down the line and can be only able-bodied to 3D print the same of the create.
© The Indian Express Online Media Pvt Ltd
by admin • March 5, 2017
by admin • November 28, 2016
by admin • November 28, 2016