24/7 Customer Service (800) 927-7671

Get Your Phone Off The Ground: Shapeways Review of ClipIt iPhone Dock

by • March 10, 2016 • No Comments

To show off a few of the amazing products our community produces, we are starting a brand new column; Shapeways Reviews.

So you travel a lot. Or perhaps
you attend lots of events, where there’s never anywhere to charge your phone except an outlet way up high, which
means You’ve left your phone on the ground, future to an outlet charging, only to have it stepped on; or worse, figured “ah… this is satisfactory, it’ll work” when leaving it swinging like a pendulum, where it inevitably falls or rockets off in a random way.

One developer best known which
burden, and took to fixing it.

We checked out the ClipIt by Remi van Oers, an awea few little device which
clips onto the stock Apple charging brick and lightning cable, holding up your phone as it’s plugged into a socket.

Assembly is simple:

Line up the hole on the ClipIt with the USB hole on the charging brick, and press fit it on.

Screen Shot 2016-03-09 at 2.42.02 PM

Screen Shot 2016-03-09 at 2.42.26 PMNext, plug in the lightning cable to the brick, securing the ClipIt.

Screen Shot 2016-03-09 at 2.42.54 PM

Route the lightning end into the tiny holder, and press fit in.

Screen Shot 2016-03-09 at 2.43.09 PMScreen Shot 2016-03-09 at 2.43.33 PM

So only plug in, and slip your phone right on top. There’s a tiny extrusion to assist hold the phone up while it’s charging.

Screen Shot 2016-03-09 at 2.43.48 PMScreen Shot 2016-03-09 at 2.44.01 PM

And there it is! Simple as which

Want one of your own? Of course you do. And be certain
to follow Remi Van Oers on Shapeways for a few additional awea few products.

What do you ponder
of the ClipIt? Leave us your comments at a lower place, and don’t forget to tag us @Shapeways with your products you want us to review, and show us what you are
manufacturing with #Shap3dByMe!

Latest posts

by admin • March 5, 2017