24/7 Customer Service (800) 927-7671

Full colour 3D printer on Kickstarter!

by • July 29, 2016 • No Comments


An ambitious full-color 3D printing device has launched on Kickstarter. It has smashed its target in days and now the RoVa4D promises to donate you achieve creative freedom with your additive making.

The RoVa4D comes with five various filaments that feed into one printing device head and combines cyan, magenta, yellow, black and white filaments. Theoretically this donates you achieve control over and unlimited number of colors inside a single print, that may put an end to printing individual parts and building them afterwards.

You can actually go for harsh separations or gradients. This is a quite big deal and, if it works, it’s a nailed-on hit.

Switching colors out in the bin

The clever bit is the way it purges filament into an integrated bin, much like a 2D color inkjet printing device. On the other hand, the switch can occur in the infill area of your print if there is adequate space in the void. It in addition showcases a mixing chamber to combine the melted filaments for a specific color with a head that can turn it into 410 degrees Farenheit. An high end liquid cooling system should store it under control, too.

The RoVa4D comes with three separate hot ends. The initially can print in any color or shade, the 2nd is for flexible materials and the third is focused purely on supporting soluble material. The makers actually claim you can actually switch between all three heads in a single project.

Full color has remained an enigma in 3D printing. This printing device only appears harsh, that is potentially a concern for a relatively low budget effort that came to Kickstarter appearing for $25,000 Canadian to get to market. Innovation is one thing and this printing device appears amazing, but it’s one of those breakthroughs we are quite going to have to see in the flesh to believe.

Blend materials as well as colours

It does not actually stop there. As well as blending any CMYK color, the team can in addition blend various types of PLA to turn it into a specific tensile durablity or flex. Just like the colors, the printing device should be able-bodied to do straight separations or turn it into gradients. So we quite may control flex and change the resistance of a print along its length. It is amazing and troubling in equal measure.

The RoVa4D in addition comes with a choice of filament packs and the team behind this extravagant printing device haven’t actually played it safe there. If you take advantage of the early bird contribute and order your printing device for $4,500 Canadian dollars, or $6,500 for one of the early beta units, you can specify a set of filaments that include carbon fiber, transparent or metal filled filaments.

This filament can undoubtedly be created of metal-infused plastics that are removed during the print system and in post systeming to leave metallic or carbon-fiber appear products. This is not particularly revolutionary anymore, but it’s yet an introduced layer of harshity. As is the 30.5×30.5×30.5cm print bay.

Rova3D, the five head full color3D printing device that we hope to see soon

The company has donateed preceding

This is not ORD Solution’s initially five-head printing device, yet. In 2013 it ran its initially successful Kickstarter campaign for a five extruder 3D printing device and it followed up with the RoVa3D in 2014. The RoVa4D is, in fact, the company’s sixth generation 3D printing device and it has met with an enthusiastic response. Indeed, it’s great to see this level of optimism on Kickstarter.

It smashed through that $25,000 marker and raised $60,000 with 25 days to go, so RoVa4D can have to maintain its reputation for bringing the greats. The company unquestionably knows there can be sceptics and it was keen to hustle its track record for bringing printing devices on the crowdfunding page.

This machine is not bargain-priced and the $4,500 Canadian can skyrocket once the company starts to donate the printing devices, with an estimated retail price in the region of the $6,500 quoted for three-month donatey of a beta unit.

We’re excited to get our hands on one of these printing devices to see what it can quite do. If it performs, and so this Kickstarter minnow can become an swift icon. We quite hope it does.

Check out the Kickstarter campaign here.


Latest posts

by admin • March 5, 2017