24/7 Customer Service (800) 927-7671

Four tips for finding the right wall thickness to turn your 3D model into a 3D print – 3ders.org (blog)

by • March 9, 2016 • No Comments

Mar 10, 2016 | By Tess
If you’ve at any time ruined a 3D print for the reason of a poorly turn it intod version, or actually not been able-bodied to print your 3D version for the reason its walls were too thin, you are pretty not alone. Fortunately for makers struggling with this common issue, French 3D printing service Sculpteo has published a number of useful tips that can assist make your version ready-to-print.
First off, when turn it intoing a printable-bodied 3D version, there are four crucial elements that must not be forgotten: scale, wall thickness depending on material, wall thickness depending on shape, and of course a little thing called gravity. If these four categories are kept in mind and the tips of them—that we can dive into shortly—are followed, you are much additional many likely to turn your digital turn it into into a functional and accurate 3D printed object.

Scale is a thing that must be considered with any 3D turn it into, as it can fundamentally determine how big of a print you can be producing. In many turn it into programs you are free to version without any meacertainments, only working with proportions, so the decision for scale comes right preceding sending the file to the 3D printing device. If your version possesses many tiny details, printing at a miniature scale, of millimetres instead of centimetres for instance, may make for a poor print. In the case of architectural versions especially, scale is amazingly significant as any details existing on the digital version may start to disappear or be unprintable-bodied the additional you scale the dimensions down. Sculpteo in addition recommends removing certain details of accurate architectural versions so that the 3D file does not have elements and information that can be not easy to print.
If you’ve got your object’s scale settled, the following significant thing to consider is what material you can be printing with and whether your turn it into’s meacertainments can work with said material. Stronger materials like Alumide, or Sculpteo’s Plastic material can be printed with a minimum wall thickness of 1mm, with other weaker materials, for instance Sculpteo’s multicolor material, the minimum wall thickness should usually be doubled to 2mm. Whether you are printing with a 3D printing service or on your own 3D printing device, you should be able-bodied to consult the brand of filament you are via to see what the minimum thickness requirements are.

Of course, any minimum wall thickness in addition depends on the shape you are additively making. As I’m certain many of your understand, 3D printing devices can turn it into approximately anything but are challenged by overhangs, and sizeable flat surfaces. To additively make an overhanging structure or object, 3D versioners can frequently add assists to their turn it into, that can be either removed by hand, or with a few technologies removed with a chemical bath. With SLS or other powder based 3D printing technologies, the bed of powder itself works as a assist, enabling makers to 3D print additional rigorous overhanging shapes.

For flat surfaces, makers frequently face the challenge of warping, that occurs when the object is cooling after the print. To lessen the chances of your sizeable flat surface warping, only increase the wall thickness of the print.
Last but not very least is gravity: a force that stores us grounded to the earth and can seriously ruin a poorly turn it intod print. It may seem obvious, but if a certain part of your turn it into is assisting too much mass—for instance a sizeable flower head on top of a thin stem—your print may succumb to the pulling force of gravity. If you store this in mind while you are turn it intoing and appropriately thicken the parts of your object that can bear the many mass and stress, your 3D print should be a good results.

If you are via a 3D printing service to make your object, they can frequently have tools on their websites to assist manual you through these steps, to guarantee that your turn it into is printable-bodied. Sculpteo, for instance, offers a Solidity Check, a Thickness Tool, and actually a Hollowing tool that can assist you to check or fix your wall thickness problems.
If you are a startner maker who has struggled with determining wall thickness preceding, only store these tips in mind and you will be 3D printing original versions in no time.

Posted in 3D Printing Technology

Maybe you in addition like: Spending in Middle Eastern and African 3D printing market to reach $1.3 billion by 2019, IDC predictsMosaic’s Palette primed to bring multi-color 3D printing to the massesDisney patent for 3D scanning and high resolution 3D printing approved by US patent officeWatch this ‘Epic Science’ video compilation of 3D bioprinting in actionNew 3D printing technique for high entropy metal alloy pioneered by Hitachi, Tohoku University researchers3D printed houses/furniture/food, trips to Space and underwater cities ‘only a century away’, scientists sayCarnegie Mellon professor predicts 5 key makes it to in metal 3D printingMechanical engineer receives $500K NSF grant to create ‘electrospray’ 3D printing technique‘Shape Optimization’ 3D printing method creates unmany likely, but not not easy, 3D printed objectsWarwick engineers create micro-SLA 3D printing system for functional piezoceramic materialsCell Applications & Cyfuse bring scaffold-free ‘Kenzan Method’ of 3D bioprinting to North America


Latest posts
test

by admin • March 5, 2017