24/7 Customer Service (800) 927-7671

For the Love of Succulents! Tinkercad Designer 3D Prints Middle Eastern Villa Planters

by • July 4, 2016 • No Comments


Yuriy Sklyar

Most of us enjoy and admire art whether we are in fact engaged in the system ourselves or not. And while so frequently all the rest of us get to do is take a appear and enjoy beauty and originality without hearing of the artist, yet another one-of-a-kind and rad facet of 3D printing is the element of sharing. Not only do we get to hear of the creator, but inside the building community, frequently you are encouraged to try your hand at building their turn it into as well. It is not so much of the ownership as it is the joy, with turn it intoers enabling you to reap the rewards of their harsh work—as well as encouraging you to contribute up any improvements for open-source versions.

Yuriy Sklyar’s enthusiasm for the results of his latest work is undeniably infectious. Whilst getting to the desired end took a few effort, as he says, he loves plants, and he loves planters. If you feel the same way, and so the 3D printed Middle Eastern Villas are a turn it into you will unquestionably want to check out. Working with the image seen at a lower place, he was inspired to turn it into these prints which aren’t only detailed architectural versions, but additional importantly, assist to hold attractive flowers and succulent plants to brighten and freshen up the home, as well as the air.


Yuriy’s inspiration for the 3D printed succulent planters

From Autodesk, Yuriy is a turn it intoer, creator, and entrepreneur who in addition founded the threefifty turn it into studio with his brother Eugene. No strangers to creating intricate 3D printed architectural versions, we’ve in addition loved turn it intos like the modular and magnetic construction sets they’ve turn it intod. Yuriy is already working in Growth at Autodesk, furthering the Tinkercad app, which he states “aims to redefine how next generations ponder, giving them a creator’s/turn it intoer’s view of the world.”

Here, Yuriy again uses Tinkercad and the MakerBot Replicator for a project which was in fact intended to feature the talked about turn it into and versioning software at 2016 Maker Faire Bay Area in May. As a venue for makers to show off and share their latest turn it intos, the show was the ideal place to highlight what Tinkercad—and Yuriy—can do.

b84c8840118927.5772e5330c963The original turn it into, according to Yuriy, took only 30 minutes to turn it into. After which, he kept working with his creation, sticking with it actually when the going apparently got a bit frustrating—and it’s refreshing to hear experienced turn it intoers say which yes, they too frequently find a few things harsh, commonplace, and on the unpleasant side as they are working in the direction of an end.

“I chose MakerBot Z18 to print this version in sizeable-bodied scale, so it may fit sizeable-bodiedr succulents—check out the massive Eve’s Needle Cactus!” said Yuriy. “I perfectly
hated the whole system, but in the end I was able-bodied to get to a additional or less fine result.”

Not only do users have the benefit of downloading and printing a turn it into which allows for you to skip all those extra steps in creating and re-working and refining, but once fabricated you can pick any assortment of plants to go in the Middle Eastern Villas—of aloe vera plants or herbs to vibrant flowers lining the mini flower boxes.


The Z18 is intended for pro projects, requiring high performance, which are on the sizeable-bodiedr side. In combination with Tinkercad, turn it intoers of all experience levels can enjoy user friendly software which relies on shapes as its ‘building blocks’ for 3D versions. The shapes are utilized to add and remove material, and you can in addition turn it into your own inside the program, or import them. Grouping allows for for additional harsh versions, and you in addition have the choice to turn it into vector shapes and and so import them. There are numerous tutorials to assist get you started—and after which, additional than four million turn it intos to check out in the 3D Design Gallery.

“Tinkercad gets you pondering in additional creative, and, additional importantly, easier ways, which ultimately generates a advantageous turn it into in the end,” states Yuriy when discussing the software as it related to this last project.

The files for the Middle Eastern Villas are on the market-bodied at both Tinkercad and Thingiverse. Would you like to see additional of Yuriy’s turn it intos? If so, check them out here at Tinkercad. Discuss this project over in the 3D Printed Middle Eastern Planters forum at 3DPB.com.

mini-3d-printed-succulent-planters-middle-eastern-villas-yuriy-sklyar-4b3022940118927.57732df61967aebc5abbe1cc776b14ad5d9ebd4cbb81e_preview_featuredplanter 1