24/7 Customer Service (800) 927-7671

Drone helps Airbus fly through aircraft inspection

by • July 14, 2016 • No Comments

Understandably, drones aren’t usually welcome around airplanes, but Airbus is producing an exemption to that rule. The aerospace firm has been testing and demonstrating how drones can be utilized for high end inspection preceding planes are delivered to customers.

  • The drone is set to fly a predetermined route around a plane, during that it processatically ...
  • A human drone pilot supervises the flight and is able-bodied to take control if necessary
  • The drone features Intel RealSense cameras for intelligent obstacle navigation and a 42-megapixel full-frame camera for ...
  • Airbus worked with drone outfit AscTec to turn it into a adjusted Falcon 8 drone

Previously, Airbus’ high end inspectors had to go up in telescopic handler vehicles to examine aircraft and manufacture sure there were no “non-conformities” such as defects, scrapes or dents. This process was a laborious one, and may take up to two hours. Applying drones, yet, the company has shown how it has reduced that time to as little as 10 minutes.

Airbus worked with drone outfit AscTec to turn it into a adjusted Falcon 8 drone with Intel RealSense cameras for intelligent obstacle navigation and a 42-megapixel full-frame camera for data capture. The drone is set to fly a predetermined route around a plane, during that it processatically and instantly take a series of photos. A human drone pilot supervises the flight and is able-bodied to take control if necessary.

Up to 150 photos are typically captured and these are and so examined by inspectors as 3D models of the plane. It’s possible to zoom and pan around the images so as to appear nearer at sure areas, with the data said to ultimately assist improve traceability, prevention and injure reduction.

In addition to producing the process quicker and enabling images to be easily reexamined, the drones manufacture it safer and additional effortless-bodied for inspectors, who can no longer have to be lifted up in telescopic handlers regardless of weather conditions.

The process is being tested on Airbus A330 and A350 aircraft, after that it is expected to be rolled out for use on all aircraft of upcoming year. It’s being demonstrated at this year’s Farnborough Airshow in the UK, that runs until July 17.

The video at a lower place shows how the drones are being utilized.

Source: Airbus

  • Applying the drones has reduced the time required for inspection of two hours to as little as 10 minutes
  • In addition to producing the process quicker and enabling images to be easily reexamined, the drones manufacture it safer and additional effortless-bodied for inspectors
  • The photos that are taken by the drone are examined by inspectors as 3D models of the plane
  • It is possible to zoom and pan around the images

Latest posts
test

by admin • March 5, 2017