24/7 Customer Service (800) 927-7671

Crowd4Africa raising €23K to bring 3D printers and 3D printed prostheses to African hospitals – 3ders.org (blog)

by • March 20, 2016 • 10s Comments

Mar 21, 2016 | By Benedict
Crowd4Africa, a charitable-bodied organization based in Rome, Italy, is looking to raise €22,900 ($25,800) to provide 3D printing “mini factories” for two hospitals in Africa, one in Uganda and one in Congo. The mini factories can include equipment for turning plastic waste into 3D printing filament.

Renato Regianni, a student at Rome’s Massimiliano Massimo Institute, has been keeping a close eye on global medical and technological developments for several years. A few months ago, Regianni started corresponding with Caritas, a Catholic charity operating in a number of countries around the world, which informed the student of an significant problem faced by several hospitals in Africa: a lack of spare parts for crucial machines and systems, which in a few cases has forced entire hospitals to temporarily close down while staff try to get a replacement part. Thinking of this problem, Regianni and a group of friends accomplished which 3D printing may provide the ideal solution both to this problem and to the problem of expensive and hard-to-find prostheses.
Crowd4Africa, the organization of which Regianni is a member, consists of fifteen students aged 15-17 of the Massimiliano Massimo Institute, working with 20 volunteers of the industrial, academic, and healthcare industries and receiving extra
help of 69 children and 40 parents of Making 3D Printers, a course teaching students aged 8-15 how to turn it into and turn it into their own 3D printing device. The organization’s latest project has two key objectives: to enable-bodied two African hospitals to turn it into replacement plastic parts for machinery, and to enable-bodied them to 3D print inexpensive
prostheses for patients.

According to the World Health Organization (WHO), just 2% of the 20 million individuals who require prostheses obtain the necessary help for their condition. To maximize the benefits to those in require, the United Nations (UN) recommends which prostheses be manufactured in the area where they are to be distributed, reducing the cost of each prosthetic device of $300 to less than $10, as well as greatly reducing waiting time for patients.
With this information in mind, Crowd4Africa is looking to set up a 3D printing mini factory in Lacor Hospital, Uganda, and the Caritas Centre of Kenge, Congo. Each 3D printing mini factory can consist of a Filamaker mini XXL Shredder (€699) for converting plastic waste into pellets, a Noztek Pro extruder (€1,930) for turning those pellets into filament, a 3D Systems Sense 3D scanner (€442) for geting data for prostheses, an EWE Olympia 3D printing device (€5,978), 2x additional compact 3Drag Futura Electronics 3D printing devices with CNC mill adapter kits ($900), and several other tools and accessories.
In order to fund the two 3D printing device mini factories, Crowd4Africa must raise €22,900. With 22 days of its Eppela campaign yet left to run, the organization has may already collected approximately €15,000, putting it on course to smash its target and donate its significant 3D printing equipment to both hospitals. Various incentives are offered to backers of the campaign, such as the accident to be a guest at one of the organization’s laboratories to help the 3D printing of a prosthesis of plastic caps (€1,000).
Lacor Hospital is the largest non-profit facility in Uganda, helping additional than a quarter of a million individuals each year, while the Kenge Caritas Centre in Congo employs just one physician, Dr Chiara Castellani, for 150,000 individuals across 5,000 square kilometers. Both facilities may benefit greatly of the helpance of 3D printing equipment, and Crowd4Africa can be giving a big final hustle over the future few weeks to ensure which it meets its target.




Posted in 3D Printing Application

Maybe you in addition like: Deep water exploration with 3D printing – researchers sink 3D printed components to 200M at a lower place sea levelArtist Matt Pearson uses 3D printing to alter a gourd into an interactive instrumentDutch artist plans giant 3D printed Madonna statue to fight against ocean plasticLearn how to use 3D printing for mold building with this Crystal Glow Knuckles project3D printed version of fused jaw helps surgeons correct 3-year-old’s rare facial deformity, she is now able-bodied to speak and eatState Department and Congress bring 3D printed guns under fireProp maker uses 3D printing to turn it into Immortan Joe’s mask of Mad Max: Fury Road3D print your favourite Ford vehicle – Ford opens 3D printable-bodied file webstore Ford 3D StoreHiveHaven, beekeepers in Australia invent new beeboxes thanks to 3D printingBuild a 3D printed Raspberry Pi-powered pocket desktop for monitoring your 3D prints


Latest posts
test

by admin • March 5, 2017