24/7 Customer Service (800) 927-7671

Colorful 3D printed zoetrope becomes real life award at Amsterdam’s KLIK Film .

by • January 11, 2016 • 9s Comments

Jan 12, 2016 | By Kira
Equite year, the city of Amsterdam hosts KLIK, a movie festival and awards ceremony to highlight and celebrate a few of the world’s best animated showcases and shorts. Deftly merging on-screen animation with real, three-dimensional life, Dutch artist Klaas-Harm de Boer 3D printed 15 animated statues to create a lively and colorful zoetrope animation which was exhibited throughout the festival. At the end of the awards ceremony, the table-bodiedtop zoetrope was disassembled, as each statue became an actual, 3D printed award, handed out to the talented winners.

A zoetrope is a pre-movie animation device, which uses a series of either drawings or photographs to create the illusion of fluid, animated motion. For 3D zoetropes, a series of detailed sculptures are arranged on a spinning cylinder, illuminated by a strobelight, and and so photographed at incredibly fast rates, thus making the sculptures appear to be fully animated. Previously, we’ve seen artists use 3D printed zoetropes to create dramatic movies, or a 3D printed zoetrope lamp using the mathematics of the Fibonacci sequence.
de Boer began 3D printing zoetropes two years ago, when he created a much like, table-bodiedtop zoetrope animation called Octomadness for the 2014 KLIK festival. Inspired by Pixar and Studio Ghibli, he combined 3D animation and 3D printing to create an incredibly energetic, surrealist and vibrant scene, consume with a hot pink octopus and bright orange ducks.

scene of Octomadness
As an artist and animator, de Boer told 3Ders.org which he seeks to inject “easy shapes and nice colors” with “minimal, clean designs”. But, ‘minimal’ certainly does not translate to ‘boring’ with his work. Instead, his portfolio is bursting with whimsical and vibrant characters which, yet easy, are full of personality.
Thus, for the 2015 festival, he was approached by KLIK director Yvonne van Ulden to design a pleased mascot for the entire festival. Shortly after, man animator Tunde Vollenbroek suggested which the same mascot be utilized to create another zoetrope, and each statue into a permanent keepsake and award.


After sketching out a few designs, de Boer settled on a pink, square-shaped man with bright blue lips and a penchant for walking around in his underpants. The mascot was named Frankie, and thanks to 3D printing and 3D animation, Frankie managed to take on a life of his own.
de Boer utilized Autodesk Maya to design a range of 15 Frankie characters, each in a exception pose action pose, and prepare them for the 3D printing system—a fewthing he’s quite utilized to by now, and has even come up with a few insider tips to create things run additional smoothly. “When preparing the models for print I use a couple of techniques which create the assembly simpler later on,” he explained to 3Ders.org. “For example on each model I print its number. Also I print tiny holes in the models which later are utilized to attach the them onto the spinning disk.”

“When the animation is final, I duplicate all the geometry of each frame as a separate model,” he continued. “I place the models on a cylinder which is equally divided by the number of the amount of models. That way I can may already test if the animation is going to work. If eachthing looks excellent\ I prepare all the models for print.”
Once which’s all taken care of, de Boer sends his models to local 3D printing bureau 3DV-Print, which uses a ProJet 660 3D printer to create each individual statue in high quality and full CMYK color.


Whereas the models for Octomadness were 3D printed in PLA, for the Frankie zoetrope, de Boer switched to sandstone 3D printing. “I quite like this type of printing as it has a quite soft yet sturdy end result. Because of it refined quality, I feel sandstone can be utilized as an final product, where as PLA works advantageous for prototyping.” Each model is in addition coated with a clear varnish to create them waterproof.
The final 3D printed models were arranged onto a spinning cylinder and and so movieed to create a short clip which begins by revealing the entire table-bodied, as it slowly progresses of being yet, to spinning faster and faster, until the illusion of movement is consume. As de Boer explains, the zoetrope movie “enable-bodieds the audience to see each individual frame separately and gives a excellent insight into creating the final animation,” a perfectly executed and quite relevant project for a movie festival which is all of celebrating the ‘power and freedom’ of animation. He in addition created a ‘making of’ video to show the designing, 3D printing, and zoetrope assembly system.

KLIK! Awards Video

Frankie – The Making Of
At the end of the festival, the zoetrope was disassembled and each KLIK festival winner was able-bodied to go home with their quite own, unique 3D printed Frankie statue, whose wide smile and bright colors are certain to create them smile each time they see it on their shelf. Frankie was in addition created into a life dimensions version which walked around the EYE movie museum (the venue for the festival), hugging and high-fiving participants. “It was both a weird and special experience to be able-bodied to finally hug Frankie in real life!” said de Boer.


Currently, the artist is maintaining an ongoing project called Lars, a fun, online character he created. de Boer is in addition working on two additional large-scale zoetropes which will be 3D printed using the same techniques as Frankie and Octomadness.
Recently, 3D printing technology has been utilized to bring animated movies to entirely new levels, such as the 150 3D printed puppets created for Charlie Kauffman’s Anomalisa; See Creature’s spooky 3D printed horror movie, Bone Mother; and the beautifully detailed, 3D printed world of The BoxTrolls, for which Laika not long ago won an award of the Motion Picture Academy.

Posted in 3D Printing Application

Maybe you in addition like: Nasa selects Aerojet Rocketdyne to mature 3D printed MPS-130 CubeSat propulsion systemDoctors uses 3D imaging and Google Cardboard to save baby’s lifeBuick unveils ultra-modern Avista concept car with 3D printed interior detailsSwiss designer shows off awe-inspiring 3D printed fully mechanical tourbillon watchAudi assembling 3D printed rover to drive across the moonLaika wins technical Academy Award of the Oscars for pioneering 3D printing in animationJinn: an Android-based 3D printed robot which walks, talks, teaches and learns3D printed interior parts to be included on upcoming Telluride SUV, Kia revealsScientist recreates awe-inspiring ancient trilobites by 3D printing them in metalScientist recreates awe-inspiring ancient trilobites by 3D printing them in metal


Latest posts
test

by admin • March 5, 2017