24/7 Customer Service (800) 927-7671

Carbon3D Unveils the M1: The Future of 3D Printing Is Here – Motley Fool

by • April 3, 2016 • No Comments

G
Image source: Carbon3D.
Venture capital-funded Carbon3D added the hotly anticipated M1 3D printing device on Friday. It’s a groundbreaking pro 3D printing device that is definitely anywhere of 25 to 100 times faster than anything preceding it. The plastic parts of the M1 have an injection molding-like high end and smoothness that is definitely perfect for testing prototypes and low-volume making. The M1 can create parts as sizeable as 144 x 81 x 330 millimeters.
Pr
Image source: Carbon3D
This is the type of 3D printing device that can reshape the industry and drive greater adoption in pro and industrial markets. It’s the precise reason why Carbon3D is considered a threat to 3D Systems (NYSE: DDD) and Stratasys (NASDAQ: SSYS).
Crossing the chasm
Carbon3D’s M1 addresses two primary shortcomings synonymous with 3D printing in these days: speed and surface finish. They’re considered a few of the largest reasons why 3D printing hasn’t yet “crossed the chasm” as a prototyping innovation to a game-changing making solution.
What sets the M1 apart of the competition is its proprietary innovation called CLIP — continuous liquid interface production. The continuous part means that the M1 does not pause to reorient itself between printing layers like every other mainstream innovation on the market does. This gives CLIP a structural advantage over other 3D printing technologies that are physically limited by having to pause between layers.
G
CLIP compared to other technologies. Image source: Carbon3D.
CLIP’s superb speed means that createers can iterate prototypes additional rapidly and bring products to market faster. Shorter product development cycles save on costs and can improve a company’s competitiveness by nextly gaining a first-mover advantage in the marketplace. Faster printing times in addition manufacture lower-volume making additional economical for the reason fewer printing devices are required to revery production targets and timelines.
A variety of materials
The M1 is already compatible with sactually resins that harden when exposed to UV rays during the printing system. M1 parts can be printed with a wide range of properties, that include flexibility, elasticity, stiffness, heat resistance, and toughness. This is not to be confutilized with a multimaterial printing device that can print parts with varying properties during the same print. The M1 can only print with one material during a print job.
3D Systems and Stratasys both contribute multimaterial 3D printing devices, but they’re considered additional specialized for late-stage prototyping, frequently utilized right preceding a create is sent off to making. The M1 many likely appeals to a wider audience for the reason it is well suited for varying stages of prototyping and actually a few low-volume making.
Carbon
Image source: Carbon3D.
A next drawback
CLIP has only existed since 2013. Other major 3D printing technologies and the parts they create have been around for over a decade and a fewtimes longer. Terry Wohlers of the 3D printing insights firm Wohlers Associates told Bloomberg that the plastic parts the M1 creates “tend to degrade over time, that is why they’re not utilized for the making of many products that use plastics.” This suggests that the M1 may yet be far of crossing the chasm into making, that takes place to be a key selling point of the platform.
Printer Image source: Carbon3D.
An industry-first business version
Carbon3D can not be selling M1’s in the conventional sense. Users who want access to the M1 can have to purchase a three-year minimum subscription for $40,000 per year. This covers onsite servicing and allows for users to upgrade when successors are released. It does not include the $10,000 installation fee or the $12,000 “required unless comparable items are owned” accessories pack. Extra create platforms and “window cassettes” that regulate the printing system cost a respective $750 and $5,000 every per year. The total cost of ownership may easily surpass six figures a year per printing device after printing materials are factored in.
3D Systems’ and Stratasys’ pro 3D printing devices frequently cost well over six figures. Carbon3D claims that its subscription-only business version reduces overhead synonymous with the traditional high upfront costs of purchasing pro-grade 3D printing devices and complexity of warranty service agreements.
The other primary reason for the subscription version is to assist the continued development of the M1’s hardware and software ecosystem. The M1 is Internet-connected and every printing device can create over one million data points per day. These data points allow Carbon3D to remotely monitor M1s in the field for issues, and in addition assist improve the user experience through next software updates that expand capabilities and enhance print high end.
A promising begin
Carbon3D has raised $141 million since its founding of highly respected venture capital firms as well as tech heavyweights Google and Autodesk. This sizeable cash hoard and serious intellectual backing manufactures it safe to presume that Carbon3D did its homework when it decided to adopt a subscription business version. Carbon3D is fundamentally betting that the high cost of pro 3D printing device ownership is limiting adoption in the marketplace in these days.
It’s too early to say if Carbon3D’s subscription version is brilliant or completely misses the mark. On one hand, the M1’s long-term operating costs are many likely to exceed actually the costliest of 3D printing devices, that may limit adoption one of sizeabler 3D printing users. On the other, the M1 is technologically superb to all other technologies for a significantly lower upfront investment, that may be precisely what the market and prospective 3D printing users has been waiting for.
Ultimately, if the M1 and its subscription plan proves to be successful, 3D Systems and Stratasys may be left catching up to the new industry pacesetter.

A secret billion-dollar stock opportunity
The world’s largest tech company forgot to show you a fewthing, but a few Wall Street analysts and the Fool didn’t miss a beat: There’s a tiny company that is definitely powering their brand-new gadgets and the coming revolution in innovation. And we ponder its stock price has only about infinite room to run for early in-the-know investors! To be one of them, only click here.


Latest posts
test

by admin • March 5, 2017