by • August 1, 2016 • No Comments
Aug 2, 2016 | By Alec
Whilst Dubai is keen to become a 3D printing world leader with their Dubai 3D Printing Strategy, they are by no means the just Middle Eastern nation to appear into this innovation. Last week a delegation of Chinese WinSun officials traveled to Riyadh, the capital of the Kingdom of Saudi Arabia, to discuss construction 3D printing. Among others, the Chinese construction 3D printing pioneers were invited to 3D print up to 1.5 million housing units over the following five years.
WinSun is the company which made construction 3D printing a practical reality. Back in 2014, the Shanghai-based company made headlines all over the internet for assembling not one, but ten 3D printed houses in less than 24 hours. Since and so, Shanghai WinSun Decoration Design Engineering Co., to donate its full name, has been assembling on which initially achievement with one 3D printed concrete creation after another. Back in March, they actually announced two attractive 3D printed Chinese courtyards.
Through this new collaboration with the Saudi government, the Chinese pioneers are now thus of to bring their expertise to the real world. Just last week, WinSun Chairman Ma Yihe and Vice President Liu Wenmin arrived in Riyadh, where they were warmly welcomed by Dr. Bander B. Al-Abdulkarim and Nawaf M. Al-Dahmash, officials of the Kingdom of Saudi Arabia Department of Housing. Imad Al Abdul Qader, Director of Marketing at the Saudi Arabian General Investment Authority, was in addition present alongside other senior leaders of the domestic real estate industry.
During their meeting, the Saudi officials announced which they strongly believed in the next of 3D printing. Chairman Ma Yihe added their custom housing 3D printing innovation to the Saudi officials, who praised its high end. The officials additional announced which they believe which WinSun’s innovation perfectly aligns with Saudi Arabia’s national policy to greatly expand the number of on the market houses.
The Saudi Arabia Ministry of Housing and the General Investment Authority therefore warmly invited Ma and WinSun to set up a construction 3D printing factory in the Middle Eastern country. What’s additional, the Ministry of Housing proposed which WinSun’s 3D printing innovation can be utilized to create a staggering 1.5 million housing units over the following five years. The two sides held friendly and optimistic consultations of these proposals. If accomplished, this may become the largest 3D printing endeavor the world has at any time seen.
Posted in 3D Printing Application
Maybe you in addition like: Design your own 3D printed snapback for Modla’s latest hat collectionUS Navy’s MV-22B Osprey with 3D printed engine housing perfectly completes test flightAMO cuts wind energy costs by 3D printing gigantic wind blade molds in 6 feet tall sectionsVictoria the goose gets 2nd 3D printed beak prosthesis after failing to adapt to initially modelESA opens new Advanced Manufacturing Lab to create 3D printing tech for next space exploration3D printing may assist restore out-of-action US Marine Corps aircraftGetting to grips with ‘Zizzy,’ a 3D printed soft robot for those with limited mobilityTrade your Pokédex for Poké-sex with 3D printed Pokémon Go sex toysSafety First Arms makes gun ownership safer with 3D printed SMART 2 firearm showcasing PIN lockBuild a $700 open source bionic prosthesis with new guide by Nicolas Huchet of Bionico
by admin • March 5, 2017
by admin • November 28, 2016
by admin • November 28, 2016