24/7 Customer Service (800) 927-7671

3ders.org – Injured stork given second chance with 3D printed leg .

by • March 10, 2016 • No Comments

Mar 11, 2016 | By Kira
3D printing has taken flight—or at very least, given sat any timeal attractive birds the accident to live and soar once again. First, there was Grecia, the Costa Rican toucan fitted with a 3D printed bill, following, Gigi, a macaw in Brazil who succeded in the world’s first titanium 3D printed beak, and who may forget Ben, the one-legged parrot? The latest case of 3D printing at the service of our feathered friends comes of Lithuania, where an injured stork can now walk again thanks to custom 3D printed leg orthoses created by Mass Portal.

The stork was first found deep in the Lithuanian countryside, trapped between waste and ropes. Whilst storks are known for their long and slender legs, this stork’s left foot was badly deformed, and its right foot was so critically injured, it may no longer stand, nat any timemind walk, and didn’t stand a accident at survival in the wild.
Rescuers took the bird into their care and tried sat any timeal therapy solutions to relieve its pain, but none seemed to manufacture any difference. Amputation wasn’t an version either, since the bird was unmost likely to survive the stress and anesthesia of a significant surgery. Instead, they had the thought of treating the bird with 3D printed orthoses. Unlike prosthetics, which are utilized to replace a missing body part, orthoses are created to fit onto an existing part to increase mobility and durablity—much like this 3D printed hand orthosis, which helped a young man recover of paralysis.
They thus brought the stork to Riga-based 3D printing device developer Mass Portal, where co-founder Juris Klava committed to helping as most as possible. They began by measuring the bird’s legs and designing sat any timeal prototype braces. In order to mimic the effortless durablity and flexibility of the stork’s actual legs, they chose to 3D print the orthoses via NinjaFlex flexible 3D printing filament. Using to 3D print them in bright orange, only like in the wild, was another thoughtful touch.

After quickly prototyping sat any timeal iterations, Mass Portal’s designers finally settled on a set of Forrest Gump-esque 3D printed braces which fit the stork perfectly. A tiny bit of sponge padding allows for the stork to put mass on its foot without cavia discomfort or pain.

Since receiving its 3D printed orthoses, the stork has been attempting to walk and stand on its own, alternating of leg to leg in order to relieve pressure and slowly create up his durablity. “He yet depends on his caretakers for survival, but he has been given a 2nd accident,” said Mass Portal. “We can do additional in our day for the well-being of non-human species than we at any time may before.”

Posted in 3D Printing Application

Maybe you in addition like: Iris van Herpen’s FW collection Lucid for fall 2016 showcases dreamlike 3D printed dressesExtrudr unveils new Green TEC 3D printing device filament created of renewable and effortless materialsStryker receives FDA clearance for 3D printed Tritanium PL posterior lumbar cageAerojet Rocketdyne that successfully tests 3D printed injector for RL-10 upper-stage rocket engineTexas couple says ‘Yes’ to $100 3D printed cubic zirconia engagement ring3D printing gets three-legged border collie Ziggy back on his pawsCovert 3D scanning operation of Nefertiti’s Bust most likely a hoaxResearchers use origami and 3D printing to manufacture surgical tools tinyer3D printed ‘person-on-a-chip’ utilized to grow human heart and liver tissue for drug testingBMW celebrates 100 years with 4D printed VISION NEXT 100 concept carUnder Armour breaks new ground with limited version 3D printed training shoe

Latest posts

by admin • March 5, 2017