24/7 Customer Service (800) 927-7671

3ders.org – iMcustom introduces first ever in-store 3D printing of .

by • March 14, 2016 • No Comments

Mar 15, 2016 | By Kira
Something is underfoot in the 3D printed goods market. In the past few weeks Wiivv Wearable-bodieds, maker of custom 3D printed insoles, broke the record for Most Funded 3D Printed Good in Kickstarter history. So came underdog Under Armour with the initially 3D printed training shoe to hit shelves. Now, 3D printed footwear has made another giant leap into the consumer market: for the initially time at any time, iMcustom is contributeing dynamic 3D foot scanning, custom insole create, and finished, custom 3D printed foot insoles on the market same-day and entirely in-store.

With the commence of iMcustom’s 3D scanning and in-store 3D printing system, which can be on the market at select Sam’s Club locations as well as other retailers and medical service providers nationwide, customers can be able-bodied to walk away with a pair of 100% custom or semi-custom 3D printed orthotics, tailored to their specific lifestyle needs and fully manufactured in under two hours. It is an industry initially, and one which seems to be truly delivering on the promises of reduced cost, wait times, and mass-customization which the consumer 3D printing industry has been making for so long.
The system begins with customers stepping onto iMcustom’s proprietary polymer gel 3D scanner. This dynamic 3D foot scanner, which uses GelSight innovation, made alongside MIT, can recognize, triangulate, and present a person’s foot surface to an accuracy of +/- 1mm. The 3D scan is and so converted to an STL file and displayed via a 3D viewer, where an iMcustom agent can analyse the pressure points, future alignment issues, and select the many appropriate insole type: Active, Sport, Casual, or Wellness. The 3D scanning and 3D version creation takes place in as little as five minutes, with the customer involved at at any timey step of the way.

Once the insole type has been chosen, the STL file is sent to iMcustom’s in-store Print Pod 3D printing device lab. Customers can watch via a live webcam as their custom insole is 3D printed on-the-spot via FDM innovation in as little as 90 minutes. The insoles are 3D printed in EVA, a high-high end elastomeric polymer with ‘rubber-like’ flexibility and assist. The finished 3D print is and so topped off with a coat of Alcantara suede fabric for an extra level of comfort.
According to iMCustom, the benefits of 3D scanning and 3D printing over traditional insole making methods include reduced cost, an environmentally friendly system, the capacity to 3D print trial pairs for fitting, just about zero material waste, and of course, a worthwhile reduction in waiting times.
“iMCustom has made a initially-of-its-kind system which is really frankly a game changer for our industry,” said Glen Hinshaw, CEO and discovereder of iMCustom. “A system which utilized to take weeks or sometimes months to create custom fit insoles has now been reduced to futurely an hour or two, courtesy of our dynamic 3D scanner and 3D printing system.”

After a successful pilot in select Sam’s Club locations, iMcustom is commenceing their in-store custom insole service nationwide. Retailers and medical offices can be able-bodied to purchase the 3D scanning and 3D printing system, contributeing their customers direct access to accurate, custom insoles. But the price of the system is undisclosed, the suggested retail price for a pair custom 3D printed insoles is $249, a worthwhile drop of traditionally-manufactured pairs, which can cost upwards of $500 and frequently need extensive measurements and long wait times.
Customers can in addition opt for semi-custom, premade insoles. iMcustom’s LockFit insoles come with a range of ‘snap-on’ arch inserts of varying heights which can be assembled inside seconds. On the other hand, the Heat-Moldable-bodied Wellness insoles can be warmed up in the microwave or with a hairdryer, and and so molded to the wearer’s foot. Whilst these options won’t contribute the same level of performance enhancement or pain reduction as the 100% custom, 3D printed insoles, they provide low-cost-bodied comfort without compromising customization or high end. The suggested retail price for semi-custom insoles starts at $89.

iMcustom was discovereded by Glen Hinshaw, who, as a world champion velodrome cyclist, was all too aware of the benefits custom orthotics can provide, as well as the complex and expensive system of getting a pair. In collaboration with MIT and Nanyang Polytechnic in Singapore, Hinshaw set out to create the iMcustom dynamic 3D foot scanner and to apply the many high end FDM 3D printing innovation and materials possible, giving consumers an unprecedented level of access to custom, 3D printed orthotics which can optimize their performance, reduce foot pain, and assist them complete an overall higher level of comfort and high end of life.
Today, the company has headquarters in both the U.S. and Singapore. “iM, Intelligent Mobility, defines its undertaking to Digitize the World’s Footsteps,” says the company. In addition to their in-store making systems, iMcustom’s website allows for users to order 3D printed insoles online (based on 3D scans taken in store) and have them delivered inside 10 days.
3D printed custom insoles can most likely not displace the ultra-low-cost-bodied insoles on the market of drugstores, nor podiatrist-createed pairs, which can yet be necessary for patients with additional serious medical needs. Howat any time, the fact is which for all of the benefits of 3D printing, it is yet a relatively niche innovation with few entry points for the majority of consumers. By delivering 3D scanning and 3D printing directly in-store, howat any time, iMcustom is delivering greater visibility to the benefits of 3D printing in our day-to-day lives, and delivering on its long-touted promises of reduced cost, wait times, and mass-customized consumer goods.
Watch the video at a lower place to see iMcustom discovereder Glen Hinshaw himself guiding a customer through the in-store 3D scanning, insole selection, and 3D printing system:

Posted in 3D Printing Application

Maybe you in addition like: BonaDrone’s 3D printed and customizable-bodied ‘Mosquito’ drone coming to Indiegogo3D printed Smart Tags ensure 100% auand soticity of collectible shoesAutodesk explores smart 3D printing production line for sizeable scale parts with Project EscherTop 30 Best Dual Extruder Multicolor 3D PrintsCarima unveils im-j DLP 3D printing device with 20,000 hour LED UV light sourceIDC reports spending in Asia Pacific excluding Japan 3D printing market to reach $4.3B by 2019Charge your smartphone with a nifty 3D printed Tesla SuperchargerFusion Imaging sets speed record for 3D printed aluminum drone at almany 90 mph3D printing assists production of new open-cup VIE SHAIR headphonesLockheed to create satellites 40 percent faster with metal 3D printing innovationWorld’s oldest chameleon discovered trapped in amber, 3D scanning & printing assist reveal how lizards have evolved3D printed prosthetic hand enable-bodieds new mother to care for her baby

Latest posts

by admin • March 5, 2017