24/7 Customer Service (800) 927-7671

3D Printing: Rocking Manufacturing – Manufacturing Business Technology

by • April 28, 2016 • No Comments

Most products are created of many parts. They outcome of many producing steps performed by various machines, each with its own operator. 3D printing replaces these steps with essentially various machines that make finished products, with all their parts, fully assembled.
3D Printing Beats Traditional Manufacturing
Traditional producing depends on weight production and its economies of scale, and low labor costs, that are barriers to entry for may-be competitors. 3D printing eliminates those barriers for the reason a single machine can make an entire part or product, fully assembled, and one worker may run an entire roomful of 3D printing devices.
As the innovation makes it to, anyone can be able-bodied to make anything, thereby democratizing producing. In addition, it is no additional expensive, per part, to 3D print one part versus a million parts, to customize each part instead of producing them all the same, and to make highly rigorous parts. Because 3D printing may eliminate the require for centralized weight production where labor costs are low, tens of thousands of tiny to medium sized 3D printing fabricators can pop up all over the world, producing customized parts and products regionally.
Revolutionizing Product Design
Products have always been slaves to how they can be created. If a create cannot be created with traditional machines, it remains trapped on paper or in a desktop. So, product createers have been forced to create for make. 3D printing alters that. In a 3D printed world, createers no longer require to create for the limitations of existing machines for the reason 3D printing devices can create approximately any create, regardless of rigorousity. With virtually no limitations on producing, 3D printing devices turn the creative system on its head. Product creates no longer require to be broken into multiple parts, according to producing constraints. Designers can immerse themselves in the creative system for the reason they can 3D print prototypes immediately. The mediocrity and monotony of weight-produced creates can be replaced with weight-customized creates. Because approximately any product can be 3D printed, the create can follow the createer’s vision and is limited only by the imagination.
Customers Become Competitors
3D printing devices can be utilized not only by traditional makers, but in addition by their customers. This is taking place currently. A university in Australia utilized 3D printing to repair hundreds of turbine blades utilized by a power generation company. Without this system, the blade maker may have sold hundreds of new replacement blades, but it looks like it can be selling far fewer new blades as time, and blades, wear on.
The refurbished parts are as excellent as or advantageous than the originals, and the system costs far less than buying a new part. This is excellent news for the part owner and terrifying for the blade maker. By via 3D printing to repair the blades, the customer no longer requires to buy new ones and has blurred the line between customer and maker.
Companies Must Adapt or Die
Suppose a customer, or suppose that the military, begins 3D printing its own spare parts, pretty than buying them of the OEM. Some OEMs can adapt. Maybe they can begin selling 3D printable-bodied digital blueprints pretty than producing parts. They may become digital create companies and close their factories.
Other OEMs can not adapt, as Kodak failed to adapt to the digital imaging revolution. Some companies may be unable-bodied to adapt. In my book I use a fictional company, ZeframWD, a maker of warp drives in the following century, to show how 3D printing may force traditional producing companies to adapt their business models.
IBM wrote in a 2013 3D printing study that “For major global companies to prosper in this new environment, radical alter is essential.” Some companies can take full advantage of the implications of 3D printing. Other companies can not be so lucky, and many are sleeping at the wheel. In the producing climate of 3D printing, they must adapt or die. For example, the turbine blade maker can be forced to adapt if many of its customers use 3D printing to repair their blades, pretty than buying new ones. It may find that licensing the digital blueprints for the blades beats producing and selling them.
Everything Will Happen
3D printing has produced a lot of hype. Some folks say it is complex to separate the hype of reality, but doing so is in fact really easy. Anything that sounds farfetched most likely is not, but it can most likely take longer to take place.
A world full of 3D printing devices that can make approximately anything can most likely be an approximately inconceivably rigorous place, presenting both amazing opportunities and one-of-a-kind challenges for new and existing makers.
John Hornick is a counselor and litigator with Finnegan and the author of the book 3D Printing Will Rock the World.


Latest posts
test

by admin • March 5, 2017