24/7 Customer Service (800) 927-7671

2016 3D Printer Buying Guide

by • April 25, 2016 • No Comments

3dp_guide_bannerSo you want to buy a 3D printing device, but you don’t know where to begin. I don’t blame you, there are a lot of 3D printing devices out there of a lot of developers with names that you’ve nat any time heard of, it is adequate to confuse and scare off anyone. So we’ve put together a list of the most and most talked of 3D printing devices on the market of all price points, so this should narrow your search down. Just decide what type of 3D printing device you are appearing for, what you want to do with it and be honest of what your level of technical ability is and there is bound to be a thing that fits the bill on this list. But, there are a few things that you should know of 3D printing preceding you go shopping.

First off, 3D printing is complex. When I say that a 3D printing device is effortless to use, you require to know that I’m speaking in relative terms. All 3D printing requires a lot of preparation, and post processing to get the most outcomes, and it is not always going to be effortless to get your 3D printing device to do what you want it to do. There is no such thing as a hassle-free 3D printing device, but the assumption is that if you are interested in via 3D printing devices for either work or play, that you are caning to get your hands a little dirty. I’m not attempting to dissuade you of buying a 3D printing device, but I just want you to know that in fact what the industry calls a “plug and play” 3D printing device is yet going to take 30 to 60 minutes to set up and get printing.

You in addition require to know that there is no perfect 3D printing device. There is no 3D printing device that can do all things, and you are going to have to carefully consider what it is that you want your 3D printing device to do preceding you decide to buy one. Designers and developers have to strike a delicate balance between three categories: Affordability, Functionality and Quality. The reality is, you are most most likely just at any time going to get two of the three, you just require to decide that two are the most significant to you.

And finally, you require to know that 3D printing is emergent innovation, so it is going to be constantly changing, getting advantageous and evolving in ways that is complex to imagine now a days. That is a really great thing, it manufactures the innovation great as a hobby, but in addition a rad way to add a few flexibility and versatility to your business.

Starter 3D Printers ($600 and under)

So you don’t know much of 3D printing but you want to donate it a try? Well it is a lot easyr to get begined these days, and there is in fact an entire class of inexpensive 3D printing devices created specifically for new users. Starter 3D printing devices are not going to be the top-high end 3D printing devices on the market, and they’re not going to create the most 3D prints, but they are a great way to get your feet wet and learn how to do the basics preceding you move on and upgrade to a higher-high end printing device. And for the reason beginer 3D printing devices are created to be effortless and fun to use, you will most likely find by yourself playing around with it long after you’ve gotten a bigger, additional serious machine.

Printrbot Play

Price: $399
3dp_guide_playThe Play, any way that you appear at it, is most most likely the most beginer 3D printing device on the market. It has a print high end higher than anything else in its class, a sturdy all-metal body that manufactures it feel like it should be a lot additional expensive than it is, and a attractive yet easy create that is just entertaining to appear at. If you are appearing for a kit experience, and so the Play is on the market as one, but since it’s the same price as the assembled it just is not worth it. There are much advantageous kit experiences on the market, and for the reason the Play relies on the sturdy metal body for its high print high end, you are just advantageous off letting the experts handle assembling it. The Play won’t be the easiest beginer 3D printing device to use, but it can most likely end up being the most experience with one.

Printer Type: FDM
Material: PLA
Resolution: 50 Microns
Build Area: 100 x 100 x 130 mm (3.9 x 3.9 x 5.1 inch)

Pros: High-high end full metal construction, high-high end prints, swift and reliable, heated bed upgrade on the market, swift printing speeds

Cons: Compact print envelope, loud while printing, no WiFi, requires third party software

XYZprinting Da Vinci Jr. 1.0w

Price: $399

3dp_guide_xyz_jrThe number one PC 3D printing device developer in the world right now is XYZprinting, and they are in addition manufacturing one of the largest, most low-priced and diverse families of 3D printing devices around. The da Vinci Jr is their beginer 3D printing device that has been optimized for those new to 3D printing who are just appearing for a bargain-priced, fun 3D printing device to play with. The Jr 1.0w is the WiFi connectable design of their beginer 3D printing device, and at just an extra $25 it’s just not in fact worth considering the non-WiFi design that is in addition on the market. Along with WiFi, the Jr 1.0w has in addition upgraded a few parts and created it easyr than at any time to use. Whilst the company hasn’t always had the most track record when it comes to customer assist, XYZprinting has created a few real progress in that area and the online community is in addition a great resource. The print high end is what you’d assume for a beginer 3D printing device, but it is a great machine that works as an great introduction to the world of 3D printing.

Printer Type: FDM
Material: PLA
Resolution: 100 Microns
Build Area: 150 x 150 x 150 mm (5.9 x 5.9 x 5.9 inch)

Pros: Affordable, sizeable create area for class, effortless to setup and use, WiFi connectivity

Cons: Low resolution, plastic casing, proprietary filament, iffy customer assist

M3D Micro

Price: $349 to $449

3dp_guide_m3d_microThe M3D Micro is the outcome of the single most good resultsful 3D printing device Kickbeginer in history, and it is effortless to see why. Not just is the printing device robust, but it is full of clat any time showcases that manufacture the Micro a ton of fun to use. It can be battery powered and carried around, and the printing head has a motion sensing chip that can store the printing device going in fact while on the go without cavia misprints or glitches. The body is created of carbon fiber rods and it has a single piece attractive injection molded body that sets it apart of all things else out there. It is not the swiftest 3D printing device on the block, and it has an oddly shaped printing area, but at this price it is really complex to imagine anyone being disappointed with the Micro.

Printer Type: FDM
Material: PLA, ABS, Nylon
Resolution: 50 Microns
Build Area: Base: 109 x 113 x 74 mm (4.4 x 4.3 x 2.9 inch) – Above 74mm Base: 91 x 84 mm (3.6 x 3.3 inch)

Pros: Motion sensor chip prin factts misprints, carbon fiber frame, injection molded body, auto calibrating, multiple colors on the market

Cons: Proprietary software, odd-shaped create area, slow printing speeds, no WiFi

FlashForge Finder

Price: $499 – $649

3dp_guide_flashforge_finderFlashForge 3D printing devices are one of the secret weapons of the 3D printing industry. Their machines aren’t flashy, they don’t have a ton of bells and whistles, but what they do have is high end machines with a few really great showcases. The Finder has a lot of great showcases usually not on the market on beginer 3D printing devices, like touch screen controls, WiFi connectivity, and an effortless to use interface. Similar to all the printing devices in this class, it is not going to be perfect, but once you get the hang of via the Finder, I can’t imagine that you’d be disappointed.

Printer Type: FDM
Material: PLA
Resolution: 40 microns
Build Area: 140 x 140 x 140 mm (5.5 x 5.5 x 5.5 inch)

Pros: Excellent print high end, quiet operation, WiFi connectivity, removable printing bed, user friendly, auto leveling bed

Cons: Bed leveling is time consuming, poorly translated assembly instructions, proprietary filament, no heated bed version

Up! Mini

Price: $599

3dp_guide_up_miniThe Up! Mini is the one entry on this list that I in fact can’t believe does not cost a lot additional than it does. Not just does it have an enclosed print area that allows for it to use high=temperature materials that good resultsfully, but it has one of the top rates of good resultsful prints of any printing device on this list. This may be a beginer 3D printing device, but it’s one of the most, and is an perfect way to learn how to use high end showcases that typically are just on the market on higher=end 3D printing devices.

Printer Type: FDM
Material: PLA, ABS, ABS+
Resolution: 200 microns
Build Area: 120 x 120 x 120 mm (4.75 x 4.75 x 4.75 inch)

Pros: Reliable, enclosed create area, really high print good results rate, heated bed, quiet, effortless to use

Cons: Low print resolution, closed source, proprietary filament

Printrbot Simple

Price: $599 ($635 with upgraded heated bed)

3dp_guide_printrbot_easySimilar to its little brother the Play, the Printrbot Simple is far additional 3D printing device than you may typically get for this price point, and it has room for tons of great upgrades, which include a heated bed and an extended create envelope. Not just can the Simple create advantageous 3D prints than most additional expensive printing devices, it can do so reliably and without a lot of hassle. The full-metal body stores all things stable that allows for the Simple to print a few great things at a great price without breaking the bank.

Printer Type: FDM
Material: PLA, (ABS, Exotic Materials with heated bed upgrade)
Resolution: 50 Microns
Build Area: 150 x 150 x 150 mm (6 x 6 x 6 inch)

Pros: Auto-leveling, high print high end, open source, solid metal construction

Cons: Loud while printing, no WiFi, requires third party software

LOW-COST 3D PRINTERS ($600 to $1,300)

Low-cost 3D printing devices are a midpoint between beginers and the additional high end, high-end workhorses that have a ton of versions, but begin to get pricey. These 3D printing devices are low-priced, have lots of showcases that manufacture 3D printing easyr and contribute a much higher level of high end prints. Whilst all of these 3D printing devices are just as capable as a few of the additional expensive alternatives on this list, they are just in more compact, additional manageable packages. This is where you want to appear if you are appearing for a additional robust beginer 3D printing device experience, or if you are appearing for a basic, hassle-free 3D printing device just for fun.

Deezmanufacturer Bukito

Price: $849

3dp_guide_bukitoThe Bukito is a value at twice the price, and has a few showcases that manufacture it truly stand in a class to itself. Not just can the Bukito run on the go, and by on the go I mean literally while it’s being carried around by the handle, but it won’t skip a beat and you will end up with a perfect print at any timey time. In fact, it’s in fact fairly complex to not create a great print on a Bukito, and it’s so effortless to use that this is a great beginer 3D printing device that can be your favourite long after you’ve moved on to bigger 3D printing pastures. And if you are feeling adventuresome, Deezmanufacturer contributes the Bukito as an assemble by yourself kit for $50 less.

Printer Type: FDM
Material: PLA, PET
Resolution: 50 Microns
Build Area: 125 x 150 x 125 mm (5 x 6 x 5 inch)

Pros: Very reliable, transportable, can run off battery for outdoor printing, no calibration requireed, open source

Cons: No heated bed on the market, no WiFi, no on-printing device controls

LulzBot Mini

Price: $1,250

3dp_guide_lulzbotminiThe award-winning LulzBot Mini is of as top of the line as you are going to get at this price point, and what you get is a lot of printing device. The Mini can print with approximately any filament type flawlessly, and requires really little in the way or maintenance or tweaking. This may not be the prettiest 3D printing device on the market, but it’s a workhorse that can store going long after you’ve donaten up and gone to bed. And LulzBot has tons of upgrade versions to allow the Mini to survive long past most comparable 3D printing devices’ typical shelf life.

Printer Type: FDM
Material: PLA, ABS, PETT, PETG, Nylon, HIPS, PVA, Exotics
Resolution: 50 Microns
Build Area: 152 x 152 x 158 mm (6 x 6 x 6.2 inch)

Pros: Print high end, customer service, sizeable material selection, user friendly, open source, self-leveling bed

Cons: Utilitarian create, tiny create envelope for price, no WiFi

Printrbot Plus

Price: $1,199

3dp_guide_plusThe big, beefy brother of the Printrbot family is in fact a whole lot of printing device, for not a whole lot of price. Just like all of the Printrbots, all of that created it to this list for the reason of their high high end, the Plus is a rad 3D printing device that other developers may most most likely sell for a lot additional. Make no mistakes of it, this is a top-of-the-line 3D printing device and a not top-of-the-line price. It is in addition effortless to upgrade, has a sizeable printing area and is completely open source. If you are appearing to upgrade of a beginer 3D printing device, but don’t want to pay too much, and so the Printrbot Play is a great version.

Printer Type: FDM
Material: PLA, ABS
Resolution: 50 Microns
Build Area: 250 x 250 x 265 mm (9.8 x 9.8 x 10.4 inch)

Pros: Auto-leveling, high print high end, open source, solid metal construction, sizeable create volume, versional dual extruders

Cons: Loud while printing, no WiFi, requires third party software

Dremel Idea Builder 3D

Price: $999

3dp_guide_dremelWhilst the Dremel Idea Builder is a modification of the tech of the FlashForge Dreamer, and has a few less showcases, don’t let that fool you into considering that this is not a great 3D printing device. Not just did the components and tech got a massive upgrade in high end, but it was simplified to reduce maintenance requires, and increase the printing area. The Idea Builder is approximately too effortless to use, and is really dependable and durable. And for the reason it is manufactured by Dremel, the Idea Builder has a few of the most customer assist around.

Printer Type: FDM
Material: PLA

Resolution: 100 Microns
Build Area: 230 x 150 x 140 mm (9 x 5.9 x 5.5 inch)

Pros: Easy to use, tiny footprint, great create volume, great customer assist, enclosed printing bed

Cons: No heated bed version, no WiFi, closed source, proprietary filament, repackaged design of FlashForge Dreamer

FlashForge Creator Pro

Price: $999 to $1,199

3dp_guide_flashforge_creator_proIf you are appearing for a 3D printing device with high-end-high end showcases but without the high price tag, and so the FlashForge Creator Pro can be an perfect version. The fact that you can get a heated bed, dual extruders and an enclosed printing bed on a machine that costs less than a thousand bucks is approximately too great to be true. You’ll require to have a bit of 3D printing know-how to store this printing device running in top shape, but if this is not your initially time to the rodeo, or you don’t mind learning to tinker with new-to-you tech, and so you can’t go wrong with the Creator Pro.

Printer Type: FDM
Material: PLA, ABS, Exotic materials
Resolution: 100 Microns
Build Area: 225 x 145 x 150 mm (8.8 x 5.7 x 5.9 inch)

Pros: Heated bed, dual extruders, dependable, enclosed print envelope, low-priced, open source, sturdy metal frame

Cons: Included software is outdated, noisy, no WiFi, not plug and play

Ultimanufacturer Original+
Price: $995

3dp_guide_ultimanufacturer_originalProvided you don’t mind putting together a kit, the Ultimanufacturer Original+ can be one of the most bargains on the market. When assembled and calibrated correctly, there are really few 3D printing devices that can match the high end of the Ultimanufacturer, and in fact the original wooden kit is yet capable of manufacturing a few of the top-high end prints possible. If you are appearing for a chance to create your own 3D printing device, but don’t want to worry of high end or assist, and so this is the perfect kit for you. And at less than a thousand dollars, it’s a steal.

Printer Type: FDM
Material: PLA, ABS, Exotic materials
Resolution: 20 Microns
Build Area: 210 x 210 x 205 mm (8.26 x 8.26 x 8 inch)

Pros: Print high end, open source, sizeable community, low-priced, high-high end software

Cons: Kit that requires assembly, wood body, noisy, requires regular tweaking and maintenance

HIGH-QUALITY 3D PRINTERS ($1,300 to $2,500)

These are most most likely not the 3D printing devices that you want to begin off with, they are high-high end machines that take a few know-how and technical ability to use effectively. But, once you know what you are doing and want a 3D printing device with a wider range of versions and showcases, any of the 3D printing devices on this list can be precisely what you are appearing for. They are perfect for either a hobbyist or a tiny business appearing for a PC 3D printing device capable of low-volume manufacturing or prototyping.

LulzBot TAZ 5

Price: $2,200

3dp_guide_taz5The LulzBot TAZ discovered itself on top of just of at any timey most-of list in 2015 and it is not complex to see why. The easy, solid create is sturdy adequate to take as much printing as you require it to take, and it just stores going. LulzBot’s custom design of Cura is widely considered one of the most on the market, and there are so most showcases and upgrade versions on the market that the TAZ 5 may conceivably last for years, manufacturing it an great investment. With its sizeable create area, customizability and with just of at any timey filament on the market to it, the LulzBot TAZ 5 is truly one of the most 3D printing devices in this class.

Printer Type: FDM
Material: PLA, ABS, HIPS, PVA, Ninja Flex, Nylon, Exotic materials and approximately all things else.
Resolution: 50 Microns
Build Area: 298 x 275 x 250 mm (11.7 x 10.8 x 9.8 inch)

Pros: Large create volume, assists dual extruders, can print approximately any material, low maintenance, open source, metal body, customer service

Cons: No enclosed printing area, not for beginners, no auto leveling, no WiFi

MakerGear M2

Price: $1,825

3dp_guide_m2_manufacturergearWhilst the MakerGear M2 is not a 3D printing device for newbies, if you know what you are doing it can create a few of the most consistent and high-high end 3D prints around. The M2 is in addition a workhorse that can print as long as you require it to, and has a shockingly low failure rate. It is approximately not easy to find negative reviews for this 3D printing device, of the durable metal construction to the great customer assist to the ridiculously low-priced price, the M2 gets high marks all around.

Printer Type: FDM
Material: PLA, ABS
Resolution: 25 Microns
Build Area: 203 x 254 x 203 mm (8 x 10 x 8 inch)

Pros: Reliable, high-high end prints, metal body, sizeable create volume, customer assist, great value

Cons: Noisy, not for beginners, requires regular calibration and maintenance, no WiFi, no dual extruder version

Ultimanufacturer 2+

Price: $2,499

3dp_guide_ultimanufacturer_2_plusIn terms of the perfect balance between ease of use and high end, it really does not get any advantageous than the Ultimanufacturer 2+. When it comes to PC 3D printing devices, not just does the Ultimanufacturer 2+ find itself on just of at any timey most-of list, but it is frequently voted as the most desirable PC 3D printing device version on the market. That is not an chance, that is for the reason Ultimanufacturer has created one of the top-high end PC 3D printing devices around, and the community that has created up around the company is additional customer assist than anyone may at any time require. (Although Ultimanufacturer has great customer assist as well.)

Printer Type: FDM
Material: PLA, ABS, Exotic materials
Resolution: 20 Microns
Build Area: 223 × 223 × 205 mm (8.7 x 8.7 x 8 inch)

Pros: High-high end prints, swift, effortless to use, customer assist, helpful community, durable construction

Cons: Steep learning curve, filament feed process requires work, no dual extruder version, no WiFi

Zortrax M200

Price: $1,990

3dp_guide_zortrax_m200The M200 of Zortrax is the largest thing to come out of the new but massively influential Polish 3D printing industry. The M200 has widely been praised for its effortless to use create, reliability and its focus on high-temperature materials. This is one of the most 3D printing devices on the market in this class, and for the price it is packed full of great showcases.

Printer Type: FDM
Material: ABS, PETG, PCABS, ULTRAT, HIPS
Resolution: 90 Microns
Build Area: 200 x 200 x 185 mm (7.8 x 7.8 x 7.2 inch)

Pros: Easy to use, reliable, create high end, heated bed, optimized for high-temp materials, company name sounds like a Superman villain

Cons: Proprietary materials just, customer service, no WiFi, no dual extruder version

MakerBot Replicator 5th Gen

Price: $2,499

3dp_guide_manufacturerbot_5th_genMakerBot is most most likely the largest name in PC 3D printing devices, and pretty one of the most good resultsful. The original MakerBot kit is sizeablely considered the 3D printing device that begined the new PC craze, and since the company was purchased by Stratasys they have an great customer service network. Whilst the Smart Extruder had a lot of issues at commence, the general consensus is that MakerBot has finally got the issue sorted and it works really well.

Printer Type: FDM
Material: PLA
Resolution: 100 Microns
Build Area: 252 x 199 x 150 mm (9.9 x 7.8 x 5.9 inch)

Pros: Good print high end, customer service, effortless to use, great software, WiFi-enabled, monitoring cameras, smartphone controllable

Cons: Extruder problems are common, high price tag, closed source, just prints PLA, noisy, inconsistent print high end

BCN3D Sigma

Price: $2,500

3dp_guide_bcn3d_sigmaThe Sigma of Spanish 3D printing device developer BCN3D is a relatively new printing device on the market, but it has been getting amazingly positive reviews for its high-high end create and effortless to use controls. The dual printing heads move independently, that manufactures them easyr to calibrate, clean and prin factts part collisions and misprints. There are a ton of material versions on the market, and for the reason all things is open source, there are a lot of things that can be tweaked or upgraded.

Printer Type: FDM
Material: PLA, ABS, PVA, HIPS
Resolution: 50 Microns
Build Area: 210 x 297 x 210 mm (8.2 x 11.6 x 8.2 inch)

Pros: Independent dual extruders, high-high end prints, multi-material prints, reliable, heated bed, open source, high end construction and create

Cons: No WiFi, customer service, price

ZEUS AiO

Price: $2,499

3dp_guide_aio_zeusThe industry is yet attempting to work all of the bugs out of All in One (AiO) 3D printing devices, but the ZEUS is a rare different that manages to do just of all things right. The 3D scanning function is intuitive and advantageous than just of at any timey other standalone, turntable 3D scanner version on the market, and the 3D printing function is just as high-high end as other 3D printing devices in its class and price range. The ZEUS in addition has a massive range of 3D printing filaments on the market to it, and it is truly a plug and play 3D printing device that can perform virtually at any timey function via its integrated touch screen controls.

Printer Type: FDM
Material: PLA, Wood PLA, Metal PLA, Conductive
Resolution: 80 Microns
Build Area: 150 x 204 x 145 mm (5.9 x 8 x 5.7 inch)

Pros: Integrated 3D scanner, reliable, WiFi enabled, auto-bed leveling, integrated 3D version search, integrated onboard STL editor, software assist, onboard cameras, effortless swap extruders, enclosed create area

Cons: Price, tiny create area, no heated bed, no version without 3D scanner, no dual extruder version

PROSUMER 3D PRINTERS ($2,500 and up)

The prosumer class of 3D printing devices are generally considered a step between a PC 3D printing device and high-priced, industrial 3D printing devices. But there are sat any timeal prosumer 3D printing devices that are highly sought after by more compact-scale companies appearing for industrial high end prints and customer service, and a few manufacturers are braving the higher price tags to bring them into their workshops. Prosumer 3D printing devices are in addition perfect additions to manufacturerspaces and educational facilities due to their high create high end, long life and service contracts. But the high price price tag in addition brings with it showcases, and all of these 3D printing devices contribute a few of the most functionality on the market. You really do get what you pay for, and if you require 3D printing devices capable of dependable, high-volume output and so it may be worth going beyond PC 3D printing devices and appearing into purchasing a prosumer version.

Formlabs Form 2
Price: $3,499

3dp_guide_form2Whilst there have been a lot of advancements in resin 3D printing, there are yet drawbacks that manufacture it ill suited for use in most homes or more compact offices, howat any time the Form 2 is a rare different. The Form 2 was created to be amazingly effortless to use and has an amazingly high create high end. The printing resolution is virtually unmatched, and it has a respectable printing envelope for its class. If you really require a resin 3D printing device, and so you perfectly
cannot go wrong with the Form 2.

Printer Type: SLA
Material: Resin
Resolution: 25 Microns
Build Area: 145 x 145 x 175 mm (5.7 x 5.7 x 6.8 inch)

Pros: Very high-high end construction, high-high end prints, high-detail prints, effortless to use, WiFi enabled, software, customer assist, resin material variety

Cons: Proprietary resin materials, messy, high cost of materials

Fusion3 F400
Price: $4,499

3dp_guide_fusion3_f400The F400 is the newest version of the rad line of industrial high end FDM 3D printing devices created by Fusion3. The enclosed printing bed helps reduce any smells synonymous with sure materials, and there are HEPA filter versions for use in low-ventilation areas. The F400 can use a wide range of materials, and the customer service is top notch. If you require an industrial high end FDM 3D printing device, this is the machine for you.

Printer Type: FDM
Material: PLA, ABS, PETG, PMMA, Nylon, HIPS, Woodfill, Polycarbonate
Resolution: 50 Microns
Build Area: 360 x 365 x 320 mm (14.2 × 14.4 × 12.6 inch)

Pros: Fast print speed, print high end, sizeable create area, enclosed create area, automatic bed leveling, effortless maintenance, lifetime customer assist, free Simplfy3D software, WiFi enabled, material selection, dual extruder version

Cons: Large footprint, cost, noisy, dual extruder version reduces print high end

Type A Machines Series 1 Pro
Price: $4,095

3dp_guide_type_a_machines_series_1_proThe Series 1 Pro of Type A Machines is a versatile, industrial high end FDM 3D printing device that can use virtually any 3D printing filament on the market, has approximately all of the showcases that you may assume a printing device of this price range to have and comes with great customer assist. The Series 1 Pro is in addition perfect for networking with other 3D printing devices for use as part of a 3D printing device farm or a manufacturing workflow.

Printer Type: FDM
Material: PLA, ABS, PET, Nylon, IGUS, Exotic materials
Resolution: 50 Micron
Build Area: 305 x 305 x 305 mm (12 x 12 x 12 inch)

Pros: Large create area, solid frame, high end prints, preset printing temps and profiles for 50+ materials, heated bed, WiFi enabled, easily networked, onboard camera, customer assist, modular construction, effortless upgrade installation

Cons: Open create area, no dual extruder version, cost, noisy

Markforged Mark Two
Price: $5,499

3dp_guide_markforged_mark_twoThe Mark Two by markforged is a solid and dependable industrial prototyping 3D printing device that has been created to exclusively 3D print high-strength parts. It uses a two 3D extruder process to combine Nylon materials with Carbon Fiber or other materials typically not synonymous with 3D printability, like Kevlar. This is a powerful industrial high end 3D printing device that was created to be utilized approximately exclusively for prototyping or the construction of lightweight but durable parts. This most most likely won’t find much use in a typical manufacturer’s workshop, but there is no other 3D printing device like it on the market.

Printer Type: CFF (Composite/FDM)
Material: Nylon combined with Carbon Fiber, Kevlar or Fiberglass
Resolution: 100 Microns
Build Area: 320 x 132 x 160 mm (12.5 x 5.2 x 6.3 inch)

Pros: Prints super sturdy objects, effortless to use, great software, dual independent heads print composite materials, high-high end construction, swift printing speed, WiFi enabled

Cons: Cost, material cost, limited use beyond prototyping, sizeable foot print, limited material colors

A few notes on the 3DPrint.com 2016 3D Printer Buying Guide. I’ve gathered my selections based on dozens of pro reviews, customer reviews, forum and internet chatter, and my own very own experience. I tried to include printing devices that may provide users with a solid 3D printing experience, and with a wide adequate variety of useful showcases for whatat any time role the printing device can be playing, be it for very own use, pro use or a little bit of both. Good luck, and pleased 3D printing!